Card share talk is not allowed on here m8, your best bet is search Google, there are plenty of c/s forums around where you will find the info your looking for.
-
THE TRUTH
The Hillsborough Independent Panel. 12/09/12
Today's report is black and white.The Liverpool fans were not the cause of the disaster.
The panel has quite simply found 'no evidence' in support of allegations of 'exceptional levels of drunkenness, ticketlessness or violence among Liverpool fans' and 'no evidence that fans had conspired to arrive late at the stadium' and 'no evidence that they stole from the dead and dying'. -
You dont need to use the CCcam.cfg to share via oscam.
Just set oscam.conf to use CCcam protocol and enable dvbapi in there too.
Now add the users ot oscam.user.
read in here lots of info.
Keep at it and you will get it. Post back at bits you get stuck, it will help others who see where you get stuck at it get fixed.Code:[url=http://streamboard.gmc.to/svn/oscam/trunk/Distribution/doc/example/]oscam - Revision 4981: /trunk/Distribution/doc/example[/url] [url=http://streamboard.gmc.to/svn/oscam/trunk/Distribution/doc/txt/]oscam - Revision 4981: /trunk/Distribution/doc/txt[/url]
Comment
-
-
Thats correct mate, all server end. Client does not need to change.
One thing i noticed in testing.
say the clinet has 2 lines. One Cline from Local 1(oscam) and 1 cline from Local 2(cccam)
Now for some reason and i think this is it, as the clinets default cam is CCcam then it will use the cline from the native CCcam server.
Now as this is the case then the cline from the CCcam thinks its clearing that channel (PTV) so it wont switch lines to compensate and have the OScam clear that channel.
Has anyone else noticed this ?
All in house local testing ofcourse.Last edited by Rodbouy; 13 April, 2011, 09:21.Comment
-
As said by BD I hope we are discussing purely local here
Outside of that will lead to a decent thread been closed, so keep the CS chat down a bit please.I refuse to answer that question on the grounds that I don't know the answer. - Douglas AdamsComment
-
I notice that and old version of CCCam 2.1.3 seems to be popular when used in conjunction with OScam, is this purely so when resharing to clients the card can still show as Hop 0 ?
I currently use CCCam 2.2.1 as card reader for a 0963 card, update entitilements automatically by recieving EMMS from a client on my local LAN. The servers a DM500c hence no direct Sat feed possible updates have to be from a client.
Can I just install OSCam on the server, remove the box key etc..from CCCam.cfg and use OScam to read the card instead ? I take it I just then add a L line to CCCam.cfg, to reshare to clients ?
In effect I shouldnt have to change anything on the client side ? Will automatic entitlement updates the card still work ?Comment
-
sorry, i started a new thread asking this, didnt look to see if there was a thread open already
....in var/tuxbox/config/ I have oscam.serv, oscam.conf and oscam.user
i have put my NLine in my cccam.cfg
i have put my boxid in oscam.serv.
Is there anything else i need to be doing? Is it enough that i have placed these files in var/tuxbox/config/ or do i have to install them some way?Comment
-
you can use oscam on its own with [dvbapi]
and do away with cccam
but cant talk about that on here
as it will be breaking the rules
i thinkComment
-
is oscam easier to configure as server on dm500 or 800 for internal shares only , cheers guys
Comment
-
I've managed to get oscam to clear my card but my other box on cccam doesnt connect! At least I got the 1st bit going
Comment
-
OK looking for Blade Media 7000HD users here that are using OScam as their LOCAL and OWN server.
I am using my own local card and for some reason the blade 7000HD wont connect to the Oscam server. WebIF reports Illegal username and boots it.
Anyone had similar issues.
PS this was connecting direct to oscam.user and using CCcam.cfgComment
-
try without CCcam.cfg
use [dvbapi]Comment
-
I have dvbapi enabled in oscam.conf
Now do you mean add the details to oscam.dvbapi or in oscam.user direct ?Comment
Comment