dreambox 800 se ERR01 NO CA FOUND hellp

[riadh2010]

Help : Err01 No CA Found (dreambox newb)

Hi,

I just got a DM800 se and after reading " Flash Your DM800 se- The Easy Way" guide I proceed to connect to the box, follow the instructions and try and put on the "OpenPLi-2.0-beta-dm800se-20110630.nfi

Unfortunately something has gone wrong, now I'm getting the error "ERR01 NO CA FOUND"
I tried to get back into it to via the ipaddress, but it wont connect now?

How can I get it back?

Can I flash it via a USB?
please help me i dont kno what to do
thanks all

[andy91]

Help : Err01 No CA Found (dreambox newb)

Hi,

I just got a DM800 se and after reading " Flash Your DM800 se- The Easy Way" guide I proceed to connect to the box, follow the instructions and try and put on the "OpenPLi-2.0-beta-dm800se-20110630.nfi

Unfortunately something has gone wrong, now I'm getting the error "ERR01 NO CA FOUND"
I tried to get back into it to via the ipaddress, but it wont connect now?

How can I get it back?

Can I flash it via a USB?
please help me i dont kno what to do
thanks all

You will have to do it through Dreamup with a null modem cable,the are loads of threads covering this on the forum if you search No Ca Found.

Andy.

[andy91]

Read these two threads below mate,not easy but you should get it back.
You certain that you flashed with correct image?

Andy.

http://www.digital-kaos.co.uk/forums/f39/flashing-dm800-problem-90895/

http://www.digital-kaos.co.uk/forums/f34/fix-no-ca-error-70341/

[raeeszain1]

On the DM800 se clone u can only flash original images prior to 15-02-2011. To recover the box you need to download sunray flashup tool & use usb to service port lead.

[riadh2010]

from were do i get sunray flashup tool please

[andy91]

from were do i get sunray flashup tool please

Have you tried the official Dreambox website?
Pretty sure you can get it back with null cable and Dreamup.

Andy.

[riadh2010]

i got one but didnt work for me
i tried 2nd_stage_pack and keep telling me file to big

[riadh2010]

wan i use sunray flashup tool i cant find the port any help with that

[andy91]

Try this,,,,

what you have to do
1-run dreamup , connect DM800 with cable
2- under dreamop select network and in the remote ip (box) put the ip you want for your box
3-now switch on the dreambox, dreamup will prepared the box for flash
when ready for flash
4 take the remote ip (box) then follow the procedure through the web now
192,168.xxxx.xxx
will get to the upgrade firmware page

This will force the box on bootloader mode

I hope this will help

Courtesy of Kevin24 look in post 2 it mentions file to big.

http://www.digital-kaos.co.uk/forums/f39/flashing-dm800-problem-90895/

Andy.

[riadh2010]

1-run dreamup , connect DM800 with cable with witch cabel
*USB*

[riadh2010]

didnt work for me

[andy91]

didnt work for me

Check them other posts mate theres a tool called Enforcer in it. Everyone has problems at first sometimes a different version of Dreamup theres several so keep trying.

Andy.

[riadh2010]

thanks lot m8
is working now i hat to change to small cabal about 5cm long he work with that
i am happy now got my box back all thanks to you m8

[andy91]

thanks lot m8
is working now i hat to change to small cabal about 5cm long he work with that
i am happy now got my box back all thanks to you m8

Glad your sorted mate a little patience goes a long way.

Andy.

[riadh2010]

yeah
i am just looking for good image for it now i tried lot of them didnt work