dreambox 800 se ERR01 NO CA FOUND hellp

[freck]

Its early days for the se model imagewise.....give it a while and images will start to be developed.
Stick with what you know unless another image is recommended by other se owners.
Freck

[riadh2010]

the one i got i cant put cccam on it

[andy91]

You could try and put this tspanel on it where you can download ccams.
Not sure it will work but worth a try.

http://www.digital-kaos.co.uk/forums/f39/enigma2-tspanel-plugin-everything-you-need-your-image-205464/

Andy,

[bubbles69]

best image for the dm800se clone is icvs image, with the gp3 wizard

[deffc0n]

Use always Gemini no any problems with anything.

[toto656]

Try this,,,,

what you have to do
1-run dreamup , connect DM800 with cable
2- under dreamop select network and in the remote ip (box) put the ip you want for your box
3-now switch on the dreambox, dreamup will prepared the box for flash
when ready for flash
4 take the remote ip (box) then follow the procedure through the web now
192,168.xxxx.xxx
will get to the upgrade firmware page

This will force the box on bootloader mode

I hope this will help

Courtesy of Kevin24 look in post 2 it mentions file to big.


Andy.

Hello,

I also scored good ERREUR01: CA NO FOUND when I turn on my 800HD SE clone

so I tried to flashed through Sunray dreamup by following your method but it does not work, I think I need to do as it should ...

I run Sunray Dreamup , the 800SE I connect via USB (COM6), tick "Use network", I put an IP in "remote IP" and I then "Connect" and turn on the 800SE ... satut is that my "Box iS HTTP network mode".
I there before an web page and I type the ip dream and it doesn't matter ... is normal

if I open "flash" and I insert the boot SSL82 2.10 ".. I have a message" Calculatting checksum ...." and the message is more than an hour without doing anything.

how? I pet not be done the right thing for me to access
der the web interface for reflashing ...

if anyone can help me will be nice ca ...

thank you

[alom5]

flashed icvs image and got 'no ca found'.

now have to look for a bloody usb - usb cable.

they don't half like to make things complicated the buggers.

bought a null cable for the 800pro now thats no good.


frickin hell!!!!!

[andy91]

flashed icvs image and got 'no ca found'.

now have to look for a bloody usb - usb cable.

they don't half like to make things complicated the buggers.

bought a null cable for the 800pro now thats no good.


frickin hell!!!!!

You're not having much luck with that box mate.
Think thats why its best to wait a while and learn from other peoples problems.
Guess its all part of the Dreambox learning curve.
If you get the No Ca Found problem sorted can you post your results and tell us what image caused you the initial probem thanks.

Andy.

[raeeszain1]

The usb to serial port lead is the same as the PS3 controller lead, which charges the controller. U need to download the sunray flashup to erradicate the CA ERROR.

[alom5]

The usb to serial port lead is the same as the PS3 controller lead, which charges the controller. U need to download the sunray flashup to erradicate the CA ERROR.

Thanks for that. Was so happy to see your post about the cable....literally jumped out of bed.

After an hours worth of trying....couldn't. Get Sunday to connect to the box art all.

Let me know if you got any ideas.

Nice1 mate.

[raeeszain1]

step 1 install cp210x, the driver for usb to serial
step 2 open sunray-flashup tool, choise serial port, click connect
step 3 turn on dm800se, then flash the DM800SE.

[alom5]

right. it wouldn't work on my laptop.

so i used the pc and all looked good got it to flash.............then box is flshing from memory..................and thats where it has stayed.

i have tried flashing from the browser as it has a ip address on the front pannel.

that flashes the image upto about 60% then skips to 100%. when you press reboot box.....does nothing and says errors on page at the bottom.

seems it's not going my way...

anything else i can do??

[alom5]

You're not having much luck with that box mate.
Think thats why its best to wait a while and learn from other peoples problems.
Guess its all part of the Dreambox learning curve.
If you get the No Ca Found problem sorted can you post your results and tell us what image caused you the initial probem thanks.

Andy.

i used the icvs 240311 image.

steer well clear everyone.

[raeeszain1]

I suggest u try another image. I flashed the dream allrussian image of 02-01-2011 and subsequntly flashed the SSL82 nfi file(bootloader file) and then rebooted box. Everything was in order. Alternatively visit Dreamoem website scroll down to the bottom, there are patched images for sim 2.10, try flashing one of them. You do not need to register.

[alom5]

update..........................

i connected cable to pc
startup sunray hit connect
ready to flash and ip address on front pannel.
disconnect serial cable to pc
held front power button down and turned power off and on.
came on with ip address
used browser on laptop and flashed an image i know was working before (blackhole)
flashed to 65% then skipped to 100%. DO NOT REBOOT FROM BROWSER.
turn box power off.
close browser down
restart the box................................AN IT'S ALIVE AGAIN>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>>>....thank FOUUUUUUUUUUUk for that.

thanks for all your help everyone.

i'm still gona try flash a better image now.