If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Like a nerd I flashed a bt82 pro version with an image for a previous version of dm800 (bt76). Now I get error when boot saying sim not found . Any ideas or is it bin time
Thanks
If you cant get ip address on box when powering up and holding in power button let go and it will say stop,if this aint possible try flashing with dreamup and correct image.
Like a nerd I flashed a bt82 pro version with an image for a previous version of dm800 (bt76). Now I get error when boot saying sim not found . Any ideas or is it bin time
Thanks
as Andy say's you will have to reflash the box. No need to be concerned with the ssl, just make sure that the image is compatible with your sim type, you say you have the dm800 pro, then that will be sim201.
Takes about 65 mins to do but will get you out of trouble,connect serial cable then open dreamup and hit connect,it'll say dreambox 800 connectedplease power up.
Press flash and select your image press ok and wait.
Freck
Comment