Vonets Wifi Bride, no internet

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tkm18
    Top Poster
    • Aug 2009
    • 158
    #1

    Vonets Wifi Bride, no internet

    Got one of these working with my xbox and PC

    As soon as i try it on my DM80 theres no internet and dodgy LAN, when i do a network test everything is ok apart from IP Address and Nameserver, theyre unconfirmed.

    Possibly the usb is supplying enough power as ive seen this can be an issue.

    The DM800 is closer than both the Xbox and PC btw, so signal strength shouldnt be an issue.

    Looks like its not joining the network.

    TIA.
    Last edited by tkm18; 22 August, 2011, 17:23. Reason: Change...
    Tags: None
    • andy91
      V.I.P. Member
      • Aug 2010
      • 3583
      #2
      Thats because your ip address and nameserver are wrong.
      The nameserver should be the same as your router and the ip address of the dreambox should be the same barring the last digit or digits,whats the router you are using?
      If you have several wifi products in the house its better to have a static dreambox ip and set dhcp as disabled.
      Then choose a big digit at end of ip to stop any ip conflicts.

      Andy.
      New Members http://www.digital-kaos.co.uk/fo rums/f5/forum-rules-2/ A Good Place To Start

        Comment

        • tkm18
          Top Poster
          • Aug 2009
          • 158
          #3
          Originally posted by andy91
          Thats because your ip address and nameserver are wrong.
          The nameserver should be the same as your router and the ip address of the dreambox should be the same barring the last digit or digits,whats the router you are using?
          If you have several wifi products in the house its better to have a static dreambox ip and set dhcp as disabled.
          Then choose a big digit at end of ip to stop any ip conflicts.

          Andy.
          Edit them in the dreambox networks test section then?

            Comment

            • andy91
              V.I.P. Member
              • Aug 2010
              • 3583
              #4
              Edit them in the dreambox networks test section then?[/quote]

              Look how mine looks in network.
              In nameserver put your router ip address.
              Look how dreambox ip ends in .100 Ive made this a big number on purpose but the rest of the ip is the same as the router barring the last .100.
              Have dhcp disabled aand reboot,should work fine.
              Gateway and nameserver are the routers ip address.
              Another option is to enable dhcp but this assigns the box an ip,i dont like it cos of ip conflict in my house.
              Andy.
              Attached Files
              Last edited by andy91; 22 August, 2011, 17:41. Reason: wrong pic lol
              New Members http://www.digital-kaos.co.uk/fo rums/f5/forum-rules-2/ A Good Place To Start

                Comment

                • austenerife
                  Junior Member
                  • Aug 2011
                  • 20
                  #5
                  Hi,
                  Also the best way to use this bridge with a dm800 is to not use the usb,put the power feed of the dm directly into the bridge.
                  Then put the power lead of the bridge into the dreambox.
                  Aus

                    Comment

                    • tkm18
                      Top Poster
                      • Aug 2009
                      • 158
                      #6
                      After messing about, its working a treat, thanks.

                        Comment

                        Previous template Next
                        Working...