tuner config settings

[ccka]

i wiped my tuner config setting in 800hd i had 2 sats but went in to tunerconfig and pressed wrong button (no to all) thinking it would take me back and lost alll sats, anyone help pl

[andy211081]

got to:
Menu
Setup
Service Searching
Tuner Config - select tuner
Then you will need to configure your sats

certain bits here will defo help you http://www.digital-kaos.co.uk/forums...-dm800-108809/

if you get stuck post back here

[ccka]

i wiped my tuner config setting in 800hd i had 2 sats but went in to tunerconfig and pressed wrong button (no to all) thinking it would take me back and lost alll sats, anyone help pl

thanks i went to tuner but it is saying not configured so cant choose it, i know my dish is on hotbird at the mo, is there a way i can get in to config my tuner as i know it will work ok after that, really new at this

[andy211081]

you can change your tuner by right clicking i think

[benny/9]

thanks i went to tuner but it is saying not configured so cant choose it, i know my dish is on hotbird at the mo, is there a way i can get in to config my tuner as i know it will work ok after that, really new at this

*******************************************
try this way mate
menu >set up> ok service searching>ok tuner configuration>ok
then useing left and right buttons set the tuner config mode to
either simply or advanced if your useing the long/lat motor settings
to move the dish then choose simple if you use diseqc 1.2 motor settings
then it's the advanced settings