R01: No CA error found. on se

[johnmo7]

NO CA found error

My windows XP doesnt seem to find drivers for DM800HD SE, has anyone successfully used the CP_2102_drivers?

[balkane]

My forum friends, I have same problem. My dream DM 800 HD PVR cannot boot. It show ERROR ! ERRO1 : NO CA FOUND. Somebody can help me. I have tried many kinds of dreamUp and enforcer. I need help help and help.

[bobo06]

Happenend to me flash wrong image thats why i got the no ca error had to replace sim card

[xallias]

I have windows 7 but it won,t install automaticly so i try the downloads in here but i have no permission to it

[tigersaid]

I have windows 7 but it won,t install automaticly so i try the downloads in here but i have no permission to it

Do you have a button on the back of the BOX?

I did like this.

Turnd of the box.
Holded the button in and Turned on the box while holding the black pinbutton on the back.
and released it when the display on the box showed an IP.

i used IExplorer and input the ip adress in the url field and start flash it with a new image

[lbo57]

Thx

Thank you so mu

[juanzamit]

there is no need of this kaos

this is what I did:


1. switch off your DM800se
2. keep it switched
3. Plug in your internet wire into the network port at the back of your receiver
4. DO NOT SWITCH ON your receiver
5. press the "mini flashup" at the back of your DM800SE and keep it pressed down
6. now switch on the receiver (remember to keep the "mini flashup" witch at the back pressed"
7. on your display you will see STOP and obtaining DHCP
. take note of the ip address 192.XXX.XXX. and go on your pc and write down the ip address in your web browser.
8. click on "flash"
9. click choose file and search for your image file .nfi file on your pc
10. click "Flash!"
11. reboot your DM800SE
12. its' done & complete. Now you can set-up again your DM800SE follow the on-screen TV wizard

here's a good image file:

http://www.mediafire.com/?rnv9bt8rp5a95qw

and a video for you that can help you understand the above

how to flash the dreambox dm 800 hd flash the dm 800 hd - YouTube

[bestpilot]

Flashing_failed.jpg

I keep getting these errors.. Not sure if Im flashing correctly..

[dixie74]

bestpilot have you tried switching box off and by where the scart connection is there is a tiny button.you can press in when turning on the box on and connected to the internet.you should now be able to reflash box via web browser.couldnt see what box you got but guessing 800se