How can I use my Sky subscription in my DM 800 HD?

[bugsy16]

My box says CCcam 2.1.4

How do I update to 2.2.1

[alom5]

My box says CCcam 2.1.4

How do I update to 2.2.1

What image you using? Normally you update via the cam manager...our tspanel if you got that installed.

[bugsy16]

eventually got TSpanel installed

Image is Enigma :2011.01.13 experimental

I've been able to install additional CCcams but I can't activate them from Camd in the blue panel. 2.1.4 is still activated

help much appreciated

[weedman]

eventually got TSpanel installed

Image is Enigma :2011.01.13 experimental

I've been able to install additional CCcams but I can't activate them from Camd in the blue panel. 2.1.4 is still activated

help much appreciated

You press right and left in the blue panel cam selector.
Move to CCcam 2.1.4 (using up/down), then press right/left to navigate to `Common Interface` or `CCcam 2.2.1`.

If you still cant see it, try rebooting (although this is not needed).

[bugsy16]

don't have "cam selector"

I've got "setup camd" and CCcam 2.2.1 isn't in it

[alom5]

Download from tspanel...and then use emu manager on tspanel to select it.

[bugsy16]

done that and the icon beside 2.2.1 turns green, but when I tune to an encrypted channel the nds button is red and text says CCcam 2.1.4

red herring?

[alom5]

Uninstall it. And hit the blue button in emu manager and install it again. Restart...and it should work. I just installed it and it works.

[denzil74]

Hi guys, sorry to hijack someone elses thread but couldn't help myself. been reading through this thread and find it very interesting and can't help but ask, can I use the same procedure to activate my sky card on spiderbox 9000hd or the instructions here are only for dreambox???

[weedman]

If your spiderbox is using enigma2, you have a card reader & card & you can install CCcam, then I dont see why not.

CCcam is the same across boxes.

[alom5]

you can use the boxkey in the spiderbox to get the chanels working if you have a sub with sly. spiderbox has cccam and newcamd....................so no problems there.

[bugsy16]

got CCcam 2.2.1 working and have the boxkey in the .cfg file but still doesn't work. How can I tell if the boxkey is correct and the sky card has the correct rights?

[denzil74]

Thank you Weedman and Alom5, yas I do have a subscription so I'll give it a go.

[alom5]

Bugsy.....is your box key correct...that's the only thing...especially if cccam is active as well....it should work.

[bugsy16]

I'll try to borrow a card and serial number

I'm a bit confused about how to generate a boxkey as information seems to differ

some threads say to use the 17 digit code on the bottom of the box - the serial number I have is only 16 digits - and use a keygenerator

Some threads say use the 10 digit code from the menu s/n and just convert to 8 digit hex

Other threads say take the first 2 digits of the 10 digit menu to make 8, convert this to hex - I think it says this gives a 7 digit hex key but in my case I only get 6 digits - and then add a zero to the front

Anyone explain the reasons or give clarification or point me at a reliable thread?

thanks