waiting for acknowledge

[jonny1983ie]

hey dude! I have it all set up and working!!!!

Only one problem and its cccam! I have downloaded the addon and then started it but that is where it stops the whole menu for this image does seam to be different than the usual.... I have ftp'ed the cfg file and all in the correct etc dir but still nothing.... its weird. any more help for me?

1Love!

Jonny

[zax66]

hello!
i have same problem.....
any suggestion??

[jonny1983ie]

Hi! your problem is with the No CE or with the blackhole and your cccam?

[jonny1983ie]

SOLVED ****

All my problems are now solved! all thanks to you guys! great job thanks for your help!

1Love!

Oh btw it was the version of cccam!

[superbo8218]

dm800 waiting for acknowledge

i cannot flash dm800 with dreamup. it hangs on "upload complete, waiting for acknowledge. the 2nd stage procedure hangs up on checking checksum. any ideas?

[Turtleman]

I've a DM500S and I had a pli image on it
Last week something happened with my power supply & the box seemed to get corrupt and wont boot up now

I downloaded Dreamup Univeral and using my Null modem cable I have tried to flash it.
I get as far as uploading Loader and then it says waiting for acknowledgement

The Flash button is greyed out.
I've tried turning it off & on again but no joy.
Could it still be the faulty power pack

It seems to be talking OK to it as it recognises its a DM500S

Any ideas?
Can we PM each other in here?

[digitalkaos57]

I could not figure out this problem

[digitalkaos57]

I'm about to go crazy

[bobfrapples]

i have exactly the same problem i bought one of these got it working lovely and used one of those test for free clines to make sure i'd not messed it up and all was good. i was so pleased with myself that i'd done it. but the very next morning every channel said no signal found and the box froze. got it back on eventually did a factory reset and tried to flash new image but all i got was " waiting for acknowledgement ". gave up with this and carried on with my first image and now it will not let me scan for channels. just keeps saying no transponder signal found on astra/eurobird28.e. not sure this sat is worth all this aggro i've been sat looking at posts on here and googled my little brains til they were frazzled but i cannot get anywhere with it.

[kayhankaynak]

thanks for force flash link

[bigcan]

NO CA FOUND error

I had this error message after an online update on my bro box.
I've done so because I was pretty sure it's a genuine one.
After reading post i'll open to checkout.
Until now, I tried DCC, flash wizard, official Dreamup and patched. With patched dreamup, I went through:
1 - after powering on, uploading process went to 100% and said "..complete waiting for acknowledge"
2 - hit flash button, selected an image, got message "..checkingsum.." and box hangs!!!!. on the box display
" DHCP...
*** serial setup***"
I waited a while but no progress bar activity

I'll try solution in this post

[love2xlr8]

got the same problem gonne try this