How to watch ITV HD on DM800 on Gemini

[fac51]

heres my lamed config ive tryed useing flashxp and dcc

[2tone]

ok try that m8 load back with dcc should say about over writing the old file click all then you can switch of by the mains for a while then back on and i hope you are able to see itv hd when you go into the tv list also have you checked to see if your box needs any updates green button and software updates

[Barnsley-Bill]

Can anyone help me out with this Ive just setup my DM800hd with a s*y dish i used to watch free sat on while i get my motoriesed dish fitted I'm really new to the sat side of the DM allso have a cable dm600 but what I would like to know is this how do you scan a transponder to get itv hd i used to get it on freesat but when i do an auto scan its not there.

Ive had a look in manual scan but all I can see is type of scan = single transponder in there i can change the frequency 'is this the transponder ?.

sorry to sound bumb but in new to all this.

[2tone]

have a look at post 10 m8 tells you how to do a scan on the 800

http://www.digital-kaos.co.uk/forums/f39/dm800-motor-settings-5607/#post32226

[fac51]

cheers mate thats done the trick ive now got the itv hd screener on

but its driving me crazy as to how youve done it

[Barnsley-Bill]

Thanks 2tone a great read itl sure be of help when i get my system setup this weekend weather permiting.

[2tone]

cheers mate thats done the trick ive now got the itv hd screener on

but its driving me crazy as to how youve done it

no probs m8 i think i might know were you were going wrong i think you might have been taking a wrong line out thats the only thing i think it can be but its good to see it working all we need now is for itv to get the finger out and put more stuff on it

[2tone]

Thanks 2tone a great read itl sure be of help when i get my system setup this weekend weather permiting.

hope all go's well m8 the 800 did my head in for a but 2 days as i was only used to the 500

[spaceman]

i get the hd channel but just get a message with not broadcasting with the itv hd logo.

[2tone]

i get the hd channel but just get a message with not broadcasting with the itv hd logo.

thats all you get till they put something on

[creepy]

Thanks for this upload

[smith]

Hi,
Don't seem to be able to get this to work with Niablo BH0.6? I've started from scratch, deleted the lamedb file, therefore no satellites or channels. Scanned just the Transponder on 28E, edit the file then killall. The System reboots with two 28E sats, one with ITV HD, the other with Brit Shorts? ITV HD reports tuner fault and no signal strength. Any ideas?
Thanks

[jsilva]

I think you have to switche it of from the wall

That worked for me

[satdreamer66]

Same problems here all channels disappeared after editing lamedb. :-(

[smith]

Sorted it after advice from satellites.co.uk forum, just used Dreambox edit