TM500 Flash Problem

[mtv1]

my 500 s thinks its a 600 s is there any thing i can do ?? went well until error while flashing will try in morning

[manxspud]

the tm500 super and tm600 use the same img's ... i had a bad flash when trying out the sif teams ported img. To sort it out i had to reflash the offical img go through the factory reset rescan ect then flash the ur img.

TM600 original.rar - 4shared.com - online file sharing and storage - download

hope this helps out.

@manx

[mtv1]

~~~~ just when you think all is well , the box recons its a 600 still factory reset the lot tried all the images i could lay me hands on the 500 images while flashing will load but eroor message comes up when writing telling me its a 600 no remote response basad out the window tis going

[manxspud]

The tm500 img's won't work on your box ... the tm500s uses the same as the tm600 ... it is a tm600 without the pvr.

does it have 1 or 2 scart sockets on the back ... then i will sort out the original img for you to flash with.

[mtv1]

2 mate cheers

[mtv1]

thanx manx m8 sorted used older version of ur 14-08-2010 done the trick thanx m8

[png1]

TM-500-Super

I have TM-500s with MGcam installed and every time I change a channel I have to restart the cam through the blue button is there a way i can change channels without having to restart cam every time

[mtv1]

go to menu/settings/expert setup make the ccam default mate

[manxspud]

Nice 1 stig.

Glad your sorted out (thank f@@@@@@@@@k )

@manx

[png1]

go to menu/settings/expert setup make the ccam default mate

tried that- cannot see cccam- to make it default

[manxspud]

Press blue button on remote ... enter 0000 when asked for pin/password ... this is the menu where you set Ccam as your default ect

@manx

[png1]

Press blue button on remote ... enter 0000 when asked for pin/password ... this is the menu where you set Ccam as your default ect

@manx

MGcam is set as default in cam setup menu I went into expert mode?

[parricull]

where it says Mgcam cam as default, move the cursor to highlight that box and press right this will change to CCam if it is installed

[sokh1991]

i have bought tm500 super. the box i have connect direct with sat and is work with fta channels, the box is linux enigma, i have try to find which fiemwere in it but i can"t find firmwere the firmwere box is blanck, now i need box work with all channels with c line so can tel anyone what to do? also tel me how to put c line link because i have link for free test for 24hour but don"t know how to put this link in the box.
I have try my self ur image file and new update file but flash with technomate control center and dream box control center also i have try with both cable(enthernet and nul ) but can"t do it , when i have try first with dream box control center it is connect but when i click on ftp option the left side box is blank and right side box is all my pc C LOCAL file. So i don"t understan what to do and how to do it.
Please anyone can tel me with full instruction step by step please, if possible with screen shot for full understanding. And which image file is best for tm500 super.
thanx for help

[sokh1991]

i have bought tm500 super. the box i have connect direct with sat and is work with fta channels, the box is linux enigma, i have try to find which fiemwere in it but i can"t find firmwere the firmwere box is blanck, now i need box work with all channels with c line so can tel anyone what to do? also tel me how to put c line link because i have link for free test for 24hour but don"t know how to put this link in the box.
I have try my self ur image file and new update file but flash with technomate control center and dream box control center also i have try with both cable(enthernet and nul ) but can"t do it , when i have try first with dream box control center it is connect but when i click on ftp option the left side box is blank and right side box is all my pc C LOCAL file. and then try with tm control center to update latest image file which i download from this webside, it is update but on the box LED says it"s fail. So i don"t understan what to do and how to do it.
Please anyone can tel me with full instruction step by step please, if possible with screen shot for full understanding.
thanx for help