Hi, i have a technomate 6900 hd super combo, i have a problem why do my Ch4 HD 11.127V 22.000 5/6,and i have the Latest S/W Version 7.48, keep stuttering every so often on my 28.2east on freeview signel strenth is about 90 percent, and i have a 4outlet LNB, and i have another HD receiver Ferguson 250 combo upstairs and Ch 4 HD is perfect, please reply.
Technomate 6900 super hd combo
Collapse
X
-
You have a signal lock but you need a quality lock, press blue button on remote move dish lieft right for best strength. you can do this via diseqc in the insatllation manual as well. Based on the asumption you have a motorised system.Hi, i have a technomate 6900 hd super combo, i have a problem why do my Ch4 HD 11.127V 22.000 5/6,and i have the Latest S/W Version 7.48, keep stuttering every so often on my 28.2east on freeview signel strenth is about 90 percent, and i have a 4outlet LNB, and i have another HD receiver Ferguson 250 combo upstairs and Ch 4 HD is perfect, please reply.Keep calm carry on.
-
Try rescanning that transponder or even better the whole of 28.2? east and see if that sorts the problem, Just to let you know there have been a few changes to the freesat channels on Astra2 in the last few days.
Comment
-
Comment
-
had the same on my old 6900 combo non super
bought the tm6902 and the new tuners are better for the channel4HD support from tm is very bad there is cheaper and better supported boxes out there.Everything discussed on this forum is for experimental and educational purposes only. Use the information at your own risk.Comment
-
Just to let you know i have the exact same problem with channel 4 HD on technomate 6900 and i have an old Humax HDCI 2000 which it works fine on. I have found that if i change channels a few times back and forth between channel 4 HD and another channel it usually works ok then.Comment
Comment