technomate tm-600 linux - viaccess

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • deepu25
    Newbie
    • Apr 2009
    • 2
    #1

    technomate tm-600 linux - viaccess

    Hi,

    I've just got a new Technomate tm-600 linux box and booted onto the default factory installed enigma image. I've inserted my valid subscription card for a southasian channel encrypted in Viaccess, but the card reader does not read saying it can't unscramble the channel. Do I need to install any plugins to get it working on Enigma or do I have to flash any other images- if so which one would be able to read Viaaccess.
    I was hoping the would read the card straight out of the box. Any advice would be highly appreciated. Thx
    Tags: None
    • .: JaCkPoT :.
      Retired Sat TV Addict
      • Aug 2008
      • 5607
      #2
      What card is it? CCCam chould read it. BUT-you will need to flash the UR image on first to be able to download CCCam from the download server, then install it and away you go.

      Read the Rules here; they apply to Everyone.

      ___________________
      In the good old days, I had
      DM800s HD
      Openbox S10
      TM500
      DM500s
      90cm FortecStar dish
      Maxx 110cm Dish
      Technomate 2300 Motors

      sigpic

        Comment

        • deepu25
          Newbie
          • Apr 2009
          • 2
          #3
          The card is a valid subcription viaccess - Asianet (south asian channel available on both Horbird 13 & eurobird 9) I've installed the latest UR image - 14/10/09 & CCcam(do I need to change the default settings?) , but still no success. Any suggestions please?


          Originally posted by .: JaCkPoT :.
          What card is it? CCCam chould read it. BUT-you will need to flash the UR image on first to be able to download CCCam from the download server, then install it and away you go.
          Last edited by deepu25; 20 October, 2009, 13:29.

            Comment

            • philipl50
              Newbie
              • Oct 2009
              • 6
              #4
              Hi,

              I've installed the latest UR image (TM600-UR-11-10-09.rar) on my TM600 and loaded CCcam v2.1.2. When I reboot the TM600 it looks like CCcam isn't running automatically. I need to telnet into the TM600 and run CCcam from the command line at the prompt, like this:

              [UR Team /> CCcam

              or to run in debug mode use CCcam -dv

              It is possible that I haven't set it up correctly yet, but it is hard finding info about the TM600.

              I haven't got any cards, but I'd be interested in seeing how easy (or not) it is to get a card working with the TM600.

              I'm still pointing at 28.2E but it looks like there may be some better stuff on 13.0E which needs a card. (Until I get motorised)

                Comment

                • Manic01
                  Banned
                  • Dec 2008
                  • 5117
                  #5
                  Latest image is 14-10-09

                    Comment

                    • philipl50
                      Newbie
                      • Oct 2009
                      • 6
                      #6
                      just flashed the latest image:
                      TM600-UR-10-14-2009.img and rebooted, CCcam didn't start automatically. Had to start it from command line after telnet in to the TM600.

                      Is CCcam supposed to start automatically on reboot?

                      The TM600 now responds to the 'blue' button and gives me a UR Panel, so I am now looking at that.
                      Last edited by philipl50; 20 October, 2009, 20:48. Reason: extra information

                        Comment

                        • abynk
                          Junior Member
                          • Jul 2008
                          • 35
                          #7
                          I am using tm500/cccam for asianet .also cccam is starting automatically but every month 31st or 1st I have to take the card out and stick it into official viaccess box to get the validity update.

                            Comment

                            • tibsom
                              Newbie
                              • Nov 2009
                              • 1
                              #8
                              Originally posted by philipl50
                              just flashed the latest image:
                              TM600-UR-10-14-2009.img and rebooted, CCcam didn't start automatically. Had to start it from command line after telnet in to the TM600.

                              Is CCcam supposed to start automatically on reboot?

                              The TM600 now responds to the 'blue' button and gives me a UR Panel, so I am now looking at that.
                              what are the commands to send to start cccam via telnet. can u explain how to do it steep by step?

                                Comment

                                Previous template Next
                                Working...