Help please - loaded the 2nd softcam update last night and used the darkman loader to transfer the file, i had switched off the AU on digi in options first and channels still won't clear. Shall i re load everything and start again or have i missed something.
-
-
REINSTALL SOFTCAM I HAVE POSTED YESTERDAY 2ND DIGI.Last edited by technomate; 6 December, 2009, 14:37.All Files posted are for educational purposes onlyALL MEMBERS PLEASE READ & FOLLOW RULES .
-
help, where can i find the latest technomate key?Comment
-
-
I have just tried again using the softcam above with no joy.
When i press connect it says 3.04 version detected, i press install and it says writing and the display on the TM goes from 0 to 100 and then loader says finished.
I have gone into system info from menu and then into CAS menu and it is all blank in the boxes at the top i doesn't say nagravision and digi tv isn't up, also no numbers in any of the boxes. I have only ever used the patch before but think i had a look in there once and all the numbers were in there.
If i am doing something wrong please let me know or show me the thread to explain how to manually input the numbers. thanks in advance Spun.Comment
-
dont forget that you must press the "keys"tab at the top of the loader when putting softcam in.that sounds like your problem.Comment
-
Thanks for everybody's patience - i have tried again with the latest softcam afterr checking the tab was on keys with no joy. i have looked at the keys in the file but don't know how to manually input what numbers on what lines. i have gone into the cas menu and there are 4 ident boxes and 4 sets of boxes to input numbers or letters. Please help as the next step is a 2 pound lump hammer. Ha Ha.
SpunComment
-
All sorted - big thanks to dick b for all his help.
Spun
Comment
Comment