Noobs guide to patching your Technomate

[benny/9]

Is there any video tutorial how to patch tm-6900?

************************************************** *******
i hav'nt seen any video's mate but it's very easy to patch
a tm 6900 either with a null modem cable or a memory stick
all the info is in this thread on how to patch

[bill4676]

AM LOST WHAT TO USE ON MY TM 3100D IHAVE READ STICKIES BUT DONT MENTION THIS BOX
I DONT NO WHAT TO PUT ON IT SOFTWARE/FIRWARE

[benny/9]

AM LOST WHAT TO USE ON MY TM 3100D IHAVE READ STICKIES BUT DONT MENTION THIS BOX
I DONT NO WHAT TO PUT ON IT SOFTWARE/FIRWARE

************************************************** *
loading software, patches and keys is much the same for all tm models with a null modem cable but the tm 3000 series receivers require there own tm3000 loader panel you dont use the darkman v187 loader

[craignorton2009]

what channels can you get off of these technomate systems

[.: JaCkPoT :.]

Depends on you equipment....the patch by itself..digitv, orf, rai, viasat(certain channels), nag2 at 23.5, kingston arqiva....with a diablo cam you will get all the above plus canal1west, 9e, kabel kiosk8w, digitalb...

[davey ply]

just used your noobs guide frist time everdone this seems to have worked thanks for your info

[harlequin]

newbie a bit slow here
May be I am missing something but only get an error saying
"Not compatable with your stb"
No matter what file I try.....

Have a TM 6900 Combo Super

[benny/9]

newbie a bit slow here
May be I am missing something but only get an error saying
"Not compatable with your stb"
No matter what file I try.....

Have a TM 6900 Combo Super

************************
this is the patch you need. look for the patch dated 18/12/08
http://www.digital-kaos.co.uk/forums...s-patch-10673/ and this is how to load the patch
FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
******************************
from the forum first download the correct patch for your receiver,and then open the zipped folder and remove the patch file ready to transfer the patch onto your usb memory stick. next insert your usb memory stick
in the usb port under the front flap and then turn the receiver on ready to load the patch.then press the usb button on your remote. on the next screen go to data transfer and click>ok now you will see a panel with the patch on it, it will highlight, [for patching] press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
********************************
you also load softcams/channel lists/official software etc:in exactly the same way by selecting the item you want to load.
*******************************

[.: JaCkPoT :.]

can someone pm me the latest digitv keys please!!!!!!!!!!!!

[harlequin]

Cheers benny/9.....but still the same....
with in a second same error!

[benny/9]

Cheers benny/9.....but still the same....
with in a second same error!

*******************************************
which way are you loading the patch?
memory stick or null modem cable and what exactly happens and what
message are you getting and has the receiver been patched before,

[harlequin]

Am using a USB, just got the box, so never patched.
When I highlight the file 6900HD_667p_181208.stp and press OK
says do not power off etc, reading, Then changes to writing and not compatible
When go to system info current SW version is 6.68 Dec 18 2008…..


Cheers

[Bulld0g]

Make sure your loading the correct patch for your box.Double check the model number the patch is for m8

[alscottydog]

Hello

Guide for the newbies.

Heres how to load the patches.

• Download the relevant patch and extract.
• Download the relevant loader and extract.
• Connect your receiver to the pc via rs232c cable.
• Choose the correct com port.
• Leave the receiver on standby.
• Open the loader and select the software tab.
• Press browse and find the extracted patch.
• Press ok then start then wait.

This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.

USB, By Benny/9

FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************

• Download the correct patch for your receiver.
• Open the zipped folder and take the patch out ready to transfer the patch onto your usb memory stick.
• Insert your usb memory stick in the usb port under the front flap.
• Turn the receiver on ready to load the patch then press the usb button on your remote.
• on the next screen go to data transfer and click>OK.

now you will see a panel with the patch on it, it will highlight, [for patching].
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
***************************
you also load softcams/channel lists/official software etc:in exactly the same way by selecting
the item you want to load.
****************************


Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.

Hope this is found helpful. Sadiq999uk and Benny/9

Thanks for you message, am new to this site so not sure how it all works or even if im messaging correctly ? Can you tell me how i can download a driver for my rs232 usb serial convertor, where do i go on this site0. Thanks

[benny/9]

Am using a USB, just got the box, so never patched.
When I highlight the file 6900HD_667p_181208.stp and press OK
says do not power off etc, reading, Then changes to writing and not compatible
When go to system info current SW version is 6.68 Dec 18 2008?..


Cheers

************************************************** ******
hi m8,
do you have a null modem cable ?
i have read that all technomate usb models are best
patch for the first time with a cable.
i know this might seem a daft question you say you have the 6900 super
does it have a ethernet port and a usb on the back?
and which usb port are you useing?