Noobs guide to patching your Technomate

[benny/9]

PLEASE HELP

I need to update my Technomate TM3200D - CY channels are not working

Thanks in Advance

************************************************** *****
the patch cant open them channels mate

[mem108]

Please can you guide me on how to sort this out

All was working up until Friday when some of my channels stopped working

I bought my technomate last xmas
the guy who gave me the box with nova card said it would allow me to watch these channels (gr + cy)

i do not know what to do to fix this

Any help is much appreciated

Thanks again

[benny/9]

Please can you guide me on how to sort this out

All was working up until Friday when some of my channels stopped working

I bought my technomate last xmas
the guy who gave me the box with nova card said it would allow me to watch these channels (gr + cy)

i do not know what to do to fix this

Any help is much appreciated

Thanks again

********************************************
i take it this is a official subscription card for these channels
and it was for a 12 months subscription? if some channels are still open
have you tried a re-scan of the receiver so channels could have changed frequencies. next are you useing the card in a cam or the card reader thats
built in the receiver, i ask this because if you have reprogrammed the cam
or changed the patch that could be why you have lost some channels

[.: JaCkPoT :.]

I think hes on about a gamma card, because the nova channels are called novasports1 cy, novasports2 cy..etc..
Anyway mate, you will need to get out your cas3 programmer and download the latest bin file to it..

[bitten]

i guys im a bit new on this stuff about sat. i've got a tms1500ci+ for the last 3 pr 4 mouths and just now cames one message on screen for moust chanells ( scramble channel ) and one knows the password
i tryed ( 0000-1111-9797-1234-4321-9876) and nothing. thks.

[degmeister]

What patch can i use on a TM-6900 HD Combo?

[linus]

Hi New to Sat and Digital Kaos.
Recently purchased a TM5400 pre loaded with channels for motorised dish however I have an 80cm dish will upgrade to motorised dish once I know what i'm doing.

I am not sure if I require the latest patch and softkey. Can anyone help I do get a few FTA channels.

[rafique]

hi can anyone help please i have technomate 1600 2ci i have patch it today but no picture it says scramble channel

[Manic01]

hi can anyone help please i have technomate 1600 2ci i have patch it today but no picture it says scramble channel

After patching load latest softcam and digi tv will clear on 1 west.

[rafique]

technomate 1600 2ci patching probs

help how do i patch and whats the latest patch please

[mtv1]

http://www.digital-kaos.co.uk/forums...chnomate-7310/ have a look here m8 good luck also here http://www.digital-kaos.co.uk/forums...loaders-30039/

[rafique]

how do i put the latest softcam in after the patching

i am having problem how do i put the latest softcam and how do i find it

[Manic01]

Softcam here

http://www.digital-kaos.co.uk/forums/f75/technomate-softcam-updates-273/index41.html

Load same as patch but select Keys tab.
Loader here

[mtv1]

http://www.digital-kaos.co.uk/forums...chnomate-7310/ read this m8

[jmal555]

Hi,

noobie with a TM3500 USB. I've tried to follow the instructions with no luck.

Guide for the newbies.

Heres how to load the patches.

• Download the relevant patch and extract.
• Download the relevant loader and extract.
• Connect your receiver to the pc via rs232c cable.
• Choose the correct com port.
• Leave the receiver on standby.
• Open the loader and select the software tab.
• Press browse and find the extracted patch.
• Press ok then start then wait.

- I downloaded the 3000_series_05-03-2009.zip and extracted it
- I downloaded the 3150_3500_USB_Loader.zip and extracted it
- I connected my PC using a USB2RS232 and serial null modem cable
- I selected the right port (5)
- I opened the loader and selected the software tab
- I pressed browse and found the extracted patch
- I get a message "This file is not a software file, please select another".

- I've redownloaded the patch and an earlier version of the patch and all give the same problem.

- Should the TM3500 be on or off when attempting the upload (tried both)
- Is there any settings required in TM3500 when patching (didn't find any).

Thanks.

Edit. Looks like the Patch was wrong (got that from a friend) and after couple of postings I was able to download the correct one from here. I'm currently attempting to patch the TM.

And the result was that this TM3500 USB PVR model did not need null modem cable, but USB stick upgrade was possible.