vu+duo mgcamd Help Please

[tinbin]

vu+duo mgcamd Help Please

------------------------------------------------------

I need your help please m8s, do I need to ftp a cam file .What file do I need, and where does it go in the settings. How do alter my c-lines to get it to work, I hope what I have said makes sense. The Image I am using on the vu+duo,is the vix 2.2 .I am using cccam at the moment, and is it possible to go from to the other .
I am sorry for posting my first question, in the wrong forum.

[digicon]

Hi Mate,

First off you will have to get the Vix MGcamd official softcam to run on your image, Install the IPK file as normal and put your sea lion in the MG_CFG file remove the C: and replace with CWS =

I have uploaded for you the official Mgcamd softcam for use in the Vix image install as you would a normal ipk file

Regards

[tinbin]

Thank you very much m8.

[digicon]

Thank you very much m8.

No problem anymore issues let us all know

Regards

[tinbin]

Hi digicon
I hope you don?t mind me asking you this m8,I have forgotten how to install an ipk file. Could you please guide me, on how to do it.

[digicon]

Hi digicon
I hope you don?t mind me asking you this m8,I have forgotten how to install an ipk file. Could you please guide me, on how to do it.

First you will have to FTP the IPK file into the TMP folder.

now go to your box and press Menu/Setup/System/VIX/Install Local Extension and you should have enigma2-plugin-cams-mgcamd.1.35a_1.0-r3_mipsel.ipk file in there.

Just press the Green Button to Install.

If you ever need anymore of the Vix cams you can download the whole range from here

http://www.4shared.com/dir/wnyHV50A/VIX_CAMS.html

[tinbin]

Thank you very much ,for your help m8.

[pervezr]

mgcamd 1.38 frozen vu+ box

I have a vu+duo box and it froze when i installed mgcamd 1.38 on a vix image 2.3. grrrrr I need to look for another ipk file. Any ideas

[jassie]

thanks this may have finally solved my problems

[brendanmcerlean]

Hi Mate,

First off you will have to get the Vix MGcamd official softcam to run on your image, Install the IPK file as normal and put your sea lion in the MG_CFG file remove the C: and replace with CWS =

I have uploaded for you the official Mgcamd softcam for use in the Vix image install as you would a normal ipk file

Regards

guys where is the MG_CFG file, thanks

[digicon]

guys where is the MG_CFG file, thanks

its located in var/keys folder

[brendanmcerlean]

guys where is the MG_CFG file, thanks

so should it be as follows?
cws= c%%&&n.&8\7.com 19599 username password
as example

i can ftp to correct location, but it doesnt seem to work...... i can view it under client in ccaminfo with a red dot beside it, but nothing in active client

thanks again

[digicon]

so should it be as follows?
cws= c%%&&n.&8\7.com 19599 username password
as example

i can ftp to correct location, but it doesnt seem to work...... i can view it under client in ccaminfo with a red dot beside it, but nothing in active client

thanks again

it wont show up in cccaminfo but yes your assumption is correct replace the N: or C: with CWS =

[brendanmcerlean]

thanks again, should there be a space before and after the = ?

is there anywhere else i can view that it is connected or inserted.

appreciate your responses!

[digicon]

thanks again, should there be a space before and after the = ?

is there anywhere else i can view that it is connected or inserted.

appreciate your responses!

No problem mate it depends on the image you use and what skin you use as some skins will show ecm etc.. the same as cccam bit some dont most images will show the info in the extra settings such as blue button or even through TSpanel