vu+duo mgcamd Help Please

[brendanmcerlean]

No problem mate it depends on the image you use and what skin you use as some skins will show ecm etc.. the same as cccam bit some dont most images will show the info in the extra settings such as blue button or even through TSpanel

ok ill downloaded loads of tools on vix 2.3 but no luck.... maybe i need space before and after cws?

[digicon]

ok ill downloaded loads of tools on vix 2.3 but no luck.... maybe i need space before and after cws?

corect space before and after

CWS =

I Think the magic HD skin will do what you want it to do on Vix image saw that somewhere else

[brendanmcerlean]

corect space before and after

CWS =

I Think the magic HD skin will do what you want it to do on Vix image saw that somewhere else

still no joy..... i have a clone which came with blackhole but it was v2 so the new kernel, i changed to VIX 2.3 but in the system info it says kernel 2.6.18, did i downgrade the kernel

thanks

[digicon]

still no joy..... i have a clone which came with blackhole but it was v2 so the new kernel, i changed to VIX 2.3 but in the system info it says kernel 2.6.18, did i downgrade the kernel

thanks

No if you installed Vix 2.3 that runs on the new kernel the thing about the duo is even on the new kernel you can still install and run images prior to kernel 3.1.1

[RuberDuck]

The Vu machines unlike their Xtrent counterparts are fully backwards compatible with all previous Kernel images and for information there are Two distinct versions of the ViX 2.3 image, There Linux 3.1.1 kernel was not introduced into the Vu builds until build 153 of the 2.3 image so all builds from ViX 2.3-GM to 2.3-152 use the 2.6.18 Kernel all builds from 2.3-153 and onwards use the 3.1.1 Linux Kernel.

[brendanmcerlean]

thanks for all the responses guys.... im about to give up... i have installed tspanel 4.9 and tried both cccam and mgcamd but ftp the cfg files for both but neither seem to work.... also when i connect my box to modem it seems to slow my bandwidth way way down... i might need to replug the openbox

[digicon]

thanks for all the responses guys.... im about to give up... i have installed tspanel 4.9 and tried both cccam and mgcamd but ftp the cfg files for both but neither seem to work.... also when i connect my box to modem it seems to slow my bandwidth way way down... i might need to replug the openbox

Sorry to hear that mate, Mine works perfectly on both types of softcam. Just a suggestion i would not use TSpanel to download the cams for the Vix image you should head over to the Vix forum and download the official Vix cams for the image they are freely available over there.

[brendanmcerlean]

thanks, maybe i should start again with a clean build as i have installed so many extensions

[digicon]

thanks, maybe i should start again with a clean build as i have installed so many extensions

That would be a wise choice, I know that both cams work as i have had them working previously when i used Vix, But i always used there own official Cam

[brendanmcerlean]

That would be a wise choice, I know that both cams work as i have had them working previously when i used Vix, But i always used there own official Cam

got the latest build installed can you point me in direction of offical cccam?

thanks

[mdt]

got the latest build installed can you point me in direction of offical cccam?

thanks

the cams in the vu/vix section of tspanel should work.. they work on my vu solo at any rate, regards mdt

[brendanmcerlean]

another stupid question, can my line start N: instead of c: