DUO2 and blackhole help

[manutd4life]

Right i ahve managed to get blackhole 2.0.5 on the duo 2. I have 2 problems.

1. I cant find the tspanel in the downloads or plugins.
2. I set my satelite onto 28.2 with my other reciever, but when i change the recievers over to the duo2 and try to watch a FTA channel on 28.2, the reciever moves the satelite dish slightly so i have no signal. I move it back to the correct position via the settings but it moves again when i go to a FTA channel again.

i have put in my long and latitude.

Not sure what i can do, i have a diseqc motor on the dish and has been set up around 12 months

Thanks

[digicon]

TSPanel you will have to install yourself as most of the Online download servers don't hold it any more but it is available from this forum if you do a search, As for the Motor positioner you may be better entering your Lon & Lat back in via the Duo2 and send the Motor to '0' so it resets the motor table in the Motor itself and then try again

[manutd4life]

thanks mate, do i install the tspanel via my usb and install it like i flash the image or do i need to do it via /tmp?
is that all i need or do i need to download tsmedia too?

trying vucc now, do I need tsmedia?

thanks

[manutd4life]

ive installed cccam 2.2.1 and 2.3.0, wasnt sure which one i needed. i cant find where i need to add the info.

[septicsmurf]

Can't really say to much about it, but you need to edit your .cfg file and ftp it to /etc.

[manutd4life]

So ill just copy it from my technomate and paste it in there like a dreambox.

Thanks

[manutd4life]

Can't really say to much about it, but you need to edit your .cfg file and ftp it to /etc.

done that but nothing happening

[manutd4life]

My reciever is currently a FTA one at the minute.

I have installed blackhole, tspanel and the cfg file. I have pressed enable and the light is green.
Am i missing anything or should it be up and running?

Thanks

[septicsmurf]

Whch version cccam did you install?

[manutd4life]

2.2.1 ccam AND 2.3.0, tried both and got 2.2.1 enabled constantly now

[manutd4life]

all sorted now.

Thanks digicon, benny/9, septicsmurf and aftermath