Setting Up Vu Duo using Team Vix Image.

[DOUGALMCD]

I would do a bit more reading mate before you want to start flashing. If you have vix 2.4.158 then you have the latest bootloader and I assume you have an original duo. Remember if you do a new flash it will wipe out settings already on box.You should do a backup before you flash box.If you need to ask anything start a new thread.hth

[sjmc1974]

just to get it in my thick head, do I flash my default firmware vu+ duo with kernel inside vix2.4.158 download then go on to flash image? must I reboot after kernel flash then flash image
many thanks

[dell_xps]

Stick any Duo image on a clone m8, as long as its a V2 box, if not update the kernal on it, and then use any image.
HTH
PS there are no clone images !!

[gio65_00]

Can anyone help me with where I can find the box images for Vu Duo clone? And also what images to recommend?

[mobiwan]

Cheers - Thanks

[stailked]

Thanks

Great help, thanks.

[josman2003]

was supposed to come with Vix already installed

[dell_xps]

Hi guys, i am new to this and have just purchased a vu+ duo clone.
I can't seem to get the box to turn on. Plugged everything in, turned it on at the back and then trying to power on by pressing the power button on the remote but the led on the box just flashes. Am i doing something wrong or is there something wrong with the box.

Thanks

Put it in the clone section m8, ta

[SGTFlipFlop]

Hi guys, i am new to this and have just purchased a vu+ duo clone.
I can't seem to get the box to turn on. Plugged everything in, turned it on at the back and then trying to power on by pressing the power button on the remote but the led on the box just flashes. Am i doing something wrong or is there something wrong with the box.

Thanks

Not sure about this but does the clone come with an image installed?

[josman2003]

Hi guys, i am new to this and have just purchased a vu+ duo clone.
I can't seem to get the box to turn on. Plugged everything in, turned it on at the back and then trying to power on by pressing the power button on the remote but the led on the box just flashes. Am i doing something wrong or is there something wrong with the box.

Thanks

[dell_xps]

Yes m8, you can.

[raj1234]

Hi

Me again, just wanted to know if anyone knows that the box has the current VIX image. I have read that the previuos image is more stable. Is it possible to downgrade the VIX image? The bootloader is up todate

[raj1234]

Actually just went in to change the channel for my toddler and the box crashed

[raj1234]

if Stef has installed the VIX firmware before I picked up the box. If I need to reinstall the firmware the can I follow the instructions on page 1 of this thread? As it has the new boot loader I would assume. Theres no harm in redoing the firmware is there?

[raj1234]

yes sent also via the box