Security IC update without rs232 board

[livdogred]

Do you know what voltage does the power supply feeds the unit so i can check myself

[DOUGALMCD]

Not offhand without borrowing box. Does the box not respond to usb at all. Is it definately a blue light?

[livdogred]

yes its definitely blue.look at this image of my internal pcu you see the part circled black when i switched it on after a couple of minutes this turned very hot i mean you cant touch it bare hands. I see this is not normal is it.

[DOUGALMCD]

I can see from picture also it's definately a clone. I would leave it off till you get new psu and you can update us from there. The first i've heard of blue light but maybe some others will be able to shed some light on it. Never had a problem with psu solo clone or genuine.

[livdogred]

ok i will tell you later when i connect the new pcu.If you discover something new do tell me and thanks for your help

[hatif120000]

I also have a vu + clone without rs232 Board.If you have a solution thank you for the post

[digicon]

I also have a vu + clone without rs232 Board.If you have a solution thank you for the post

i have solution buy vu + clone with rs232 board and then go to introduce myself section. problem solved

[nedrosat]

******************************
as you can see from the diagram posted earlier
the small rs232 board for the vu clone boxes
does'nt have anything but circuitry on it. this
board changes the pin connection to work with
the vu boxes, and it appears to only use 4 pins
and they are these
ground goes to ground
pin 4 goes to pin 3
pin 5 goes to pin 5
pin 6 goes to pin 2
and i cant see why a null modem cable converted
to the board settings wont work without the rs232 board

please can attach the shema of 232 board, because i havn't this and supplier don't know it !!!

sow waiting your help

[martin20009]

can some one repost the the diagram of the board.

I plan on building a board as I have just received my IC upgrade. I just to to be clear on the pin out i.e computer side and receiver side.

I'm guessing that

Computer Side pin 4 goes to pin 3 Receiver Side.
pin 5 goes to pin 5
pin 6 goes to pin 2

Hope it makes sense.

******************************
as you can see from the diagram posted earlier
the small rs232 board for the vu clone boxes
does'nt have anything but circuitry on it. this
board changes the pin connection to work with
the vu boxes, and it appears to only use 4 pins
and they are these
ground goes to ground
pin 4 goes to pin 3
pin 5 goes to pin 5
pin 6 goes to pin 2
and i cant see why a null modem cable converted
to the board settings wont work without the rs232 board