Help!! Ford Ranger dashboard

**Dylan Chin** · 23rd July, 2011, 03:59 AM

Hi every DK mate,who can advise me how i change this ford ranger 2004 year odometer.
thanks in advance

**cokolo** · 23rd July, 2011, 07:49 AM

DIGA consult manual without opening dash

**iqcaraudio** · 23rd July, 2011, 10:43 AM

You could also use upa...

**Dylan Chin** · 23rd July, 2011, 06:43 PM

Thanks every Dk mate help me.
May i use tacho or x-prog(clone)

**smartymarti** · 23rd July, 2011, 06:46 PM

Yes you can use tach clone

**digimile** · 24th July, 2011, 12:43 AM

hi
yes with tacho clone put wires like the post above show and select ranger 05-,then it show u ??????? as old mileage which is ok and put new miles data will be in miles so if want in km convert to miles and put as new value and press ok and after 20 sec. trip become activate in the display of cluster and programming done.
Thankx

**iqcaraudio** · 24th July, 2011, 03:45 AM

Originally Posted by Dylan Chin

Thanks every Dk mate help me.
May i use tacho or x-prog(clone)

Its hard to use xprog with that chip, i would prefer upa for this one

**Dylan Chin** · 24th July, 2011, 04:19 AM

i solution the problem..thanks

**Dylan Chin** · 25th July, 2011, 08:46 AM

everybody,i got a new problem.
The mileage problem is solution
but after i assembles the meter ,start the car
the Injectible oil emulsion,rpm..will up but dont down

what the problem about this?????

**digimile** · 25th July, 2011, 08:45 PM

hi
u did with upa usb programmer or tacho clone???

**Dylan Chin** · 26th July, 2011, 12:39 AM

i use tacho clone

**Dylan Chin** · 28th July, 2011, 05:13 AM

Hi mate,all the meter working now exe speedometer.
i have resolder all ,i have try 12v positive and negative on table,the speedometer will move but at the car the speedometer not working.
did someone teach me how i solution the problem?
help!!!!