***Toyota Smart Lost Key Solution - No Id code needed***

**usman4** · 17th August, 2016, 09:32 PM

I think u first time registering smart keys.. bro bro bro reset files don't gives u ignition on so how can u use techstream?? Techstream perfectly works with ignition on. Use my reset files and use any obd programmer like skp900,x100 pro, t300 to register smart key, doesn't matter its new or used.

**makura** · 17th August, 2016, 09:46 PM

Originally Posted by usman4

I think u first time registering smart keys.. bro bro bro reset files don't gives u ignition on so how can u use techstream?? Techstream perfectly works with ignition on. Use my reset files and use any obd programmer like skp900,x100 pro, t300 to register smart key, doesn't matter its new or used.

I am not getting ignition on bro,when i connect techstream i get an option that says key registration on the car selection and key programming procedure starts.I have done several smart keys but not the one with no id code unit.
I could be doing something wrong,i will try with x100 in the morn and report back.

**usman4** · 17th August, 2016, 09:56 PM

Yes its better to be try with x100 and report..

**zippy82** · 18th August, 2016, 11:08 PM

Hi can anyone reset these dumps? It's not the normal eprom as it's a 95160

Yaris smart box 89990-0D030 M95160-W.rar Yaris smart immo box 8978-0D030 S-93C56BD.rar

**akbarkeys** · 25th August, 2016, 12:21 PM

Please help,,,,!!!! all key lost toyita passo 2004...
Toyota passo, thn 2005, No vin QNC100014894 and mechine K31272252,and i need your help....

**makura** · 25th August, 2016, 01:02 PM

Originally Posted by usman4

Yes its better to be try with x100 and report..

Not working for me,X100 wont communicate with unit after the reset dump,but with original dump i get options to reset immo etc.

**aketokediag** · 25th August, 2016, 01:04 PM

Mate what is the problem? What brand of vehicle are you working on? Will try n help u.

Sent from my Infinix X506 using Tapatalk

**makura** · 25th August, 2016, 01:17 PM

Originally Posted by aketokediag

Mate what is the problem? What brand of vehicle are you working on? Will try n help u.

Sent from my Infinix X506 using Tapatalk

Its a 2011 Toyota Vitz,no ID box on this model.All keys lost,AVDI cant do master key on this either,but with tango i can do master key and get ignition on,but the car wont start but just crank and wont accept adding a key that i got from the stealer.

**usman4** · 26th August, 2016, 01:46 PM

bro then find your fault.. my files are 100% correct

**usman4** · 26th August, 2016, 08:31 PM

Solved..........

**PremierD** · 26th August, 2016, 08:43 PM

Data inserted looks fine to me ...
apart from it having 4 keys on one location and 2 in the other

**usman4** · 26th August, 2016, 10:38 PM

I repaired dump and then make master key and vehicle started.

**lioncam** · 1st September, 2016, 01:53 PM

Hi,
please i need frequency for this toyota,
vin: 2T3DK4DV7AW026780,
try to program key with 433 mhz without succes.
thks.

**cjawahir** · 1st September, 2016, 02:08 PM

Originally Posted by lioncam

Hi,
please i need frequency for this toyota,
vin: 2T3DK4DV7AW026780,
try to program key with 433 mhz without succes.
thks.

315mhz , this vehicle is LHD ?

cj

**rob h** · 2nd September, 2016, 08:42 AM

Tango came out with a new upate: I do not know what types it coverers.
Probable G-chip and before.

First in the World

ump editor to pair Smartkey ECU with ID CODE ECU.
True calculation of synchro code on Smartkey ECU.
Dump editor pairs all four units:
Engine ECU, Smartkey ECU, Steering Lock ECU and ID CODE ECU

Not so long ago,they released a g-chip all keys lost by obd, for european cars.