Carprog Mcu Reflash Step by step

**electronistul21** · 25th February, 2019, 12:37 PM

yes,you have some protocols blocked,not only to airbag,see and in dashbord software

**joker01** · 25th February, 2019, 04:05 PM

ok then everything is correct!!!
thanks

**Junkyard Dog** · 9th March, 2019, 10:16 PM

Hi every one, I will go rework my carprog 8.21 what i need to order, what electric components i need to replace on PCB?

**CVT** · 15th March, 2019, 07:13 AM

Originally Posted by Stelaras26

i have programmed 3 carprogs like this with a 10euros jlink..

I dont unsolder anything from the back of pcb,i dont lift any pin of the mcu....

much easier way,it took me 3 minutes each.

Is this a Chinese clone or the original? And which version is it?

Originally Posted by wokcz

In case anyone needs them, these are the files I used to upgrade my 4.01 carprog to 4.74 using JLink v9 (sw J Flash 6.20a).

carprog.jflash (Project file for J Flash)
at91sam7s256 -sn-m61.bin (firmware data file to load in J Flash)
201213CAR000ME61.lib (lib file to use with carprog software)

Is 4.74 the highest version that 4.01 can be updated to?

**Danimp94** · 16th March, 2019, 02:29 PM

Nice Post!!

**CVT** · 17th March, 2019, 03:43 AM

I was able to update my Chinese clone to 8.21

**Thor2** · 17th March, 2019, 09:21 PM

See the carprog full with all 21 adapters and full authorisation selling on Chinese sites, does the full authorisation mean that all the functions are in use ?

**DiagService** · 21st March, 2019, 11:19 PM

segger.jpg hi guys can you help me I have problem with carprog mcu
TDO is constant HIGH
have you any idea
I read this with china Jlink

**M0rtus** · 27th April, 2019, 04:11 PM

Is there any solution for the A+ adaptor yet?

Sent from my Mi MIX 2S using Tapatalk

**mikroel** · 27th April, 2019, 08:39 PM

Originally Posted by M0rtus

Is there any solution for the A+ adaptor yet?

Sent from my Mi MIX 2S using Tapatalk

No
Only original
Sent from my HONOR 8X

**M0rtus** · 27th April, 2019, 08:42 PM

Originally Posted by mikroel

No
Only original
Sent from my HONOR 8X

Will the original A+ adaptor work on a clone?

Sent from my Mi MIX 2S using Tapatalk

**mikroel** · 27th April, 2019, 08:45 PM

Yes if You have good carprog

Sent from my HONOR 8X

**M0rtus** · 27th April, 2019, 09:35 PM

Originally Posted by mikroel

Yes if You have good carprog

Sent from my HONOR 8X

Thanks for the info .... I've PMd you

Sent from my Mi MIX 2S using Tapatalk

**mikroel** · 28th April, 2019, 01:35 AM

Originally Posted by M0rtus

Thanks for the info .... I've PMd you

Sent from my Mi MIX 2S using Tapatalk

Yes it can emulate Volo and Renault dashboard. And making Volvo keys,

And decoding VW navi FIS module..

And many many other useful things

Sent from my HONOR 8X