ALFA ROMEO 156 EDC15C7 IMMO

[gwiazdamb]

dont working...
Any idea?
please help me!
thx

Immo box must be disconnected or code line


If it doesn't work, your problem is not the immo
Look for faults in the cables, fuses, relays, ECU power and ground
It's best to have the installation diagram handy and ready to go

[cseko]

Immo box must be disconnected or code line


If it doesn't work, your problem is not the immo
Look for faults in the cables, fuses, relays, ECU power and ground
It's best to have the installation diagram handy and ready to go

I disconnected immo box but car dont start. I readed fault with Bosh KTS and the parameters i see: Immo status: Active and Car start enabled: No
I think the problem are IMMo...

[gwiazdamb]

I disconnected immo box but car dont start. I readed fault with Bosh KTS and the parameters i see: Immo status: Active and Car start enabled: No
I think the problem are IMMo...

What programmer do you use for reading and writing

[Autronico2]

I disconnected immo box but car dont start. I readed fault with Bosh KTS and the parameters i see: Immo status: Active and Car start enabled: No
I think the problem are IMMo...

Listen, I immo'd you off as I always do on these cars, I don't know how other users processed the file, but after all these versions that didn't work, I think your problem is somewhere else, check carefully the power supplies and the main relay.