Dreambox 7025 Problems Please Help!!!!

[Neil]

right ive done it, the only thing i have to do now is work out how to use the part where you watch one channel and record another, cause the tuner 1 port is connected to the cable lead but the tuner 2 port is empty so dont know what to do.

I am well chuffed for you that my backed up 7025 imaged worked for you, did you have to re scan for channels? Please tell me what you had to do as I want to put that 7025 backup image image on this forum.

Your cable feed should go to tuner 1 in only. Then make a short lead, 6" or 8" that goes from tuner 1 out to tuner 2 in. Did your box not come with a short lead with 2 F connectors on it? This is used for this but you need the F converters to fit the cable connectors. Your cable feed should not go to the coax rf connector in the middle of the box, that is for aerial in and out so you can watch TV in another room

[smedzdave]

im now offically done .
neil thanks for your help AGAIN mate i cant thank you enough.

[shirehorse99]

Hi neil . Following this thread with interest. Do you use evocamd or mgcamd? Mgcamd always seems to freeze and i cant seen to get evocamd to work. Any chance of some help.

[westkill]

Hi neil . Following this thread with interest. Do you use evocamd or mgcamd? Mgcamd always seems to freeze and i cant seen to get evocamd to work. Any chance of some help.

what version of evocamd are you using

[shirehorse99]

im using 2.17 downloaded off the pli server

[jimbo69jones]

right ive done it, the only thing i have to do now is work out how to use the part where you watch one channel and record another, cause the tuner 1 port is connected to the cable lead but the tuner 2 port is empty so dont know what to do.

Plug a lead from the output of tuner 1, into the input of tuner 2.

[shirehorse99]

just downloaded another version 2.17c -renamed the evocamd.mips to evocamd -ftp`ed it over- chmodded it to 755 and rebooted machine and all is then ok but it wont autoupdate.seems the one off pli server doesnt work

[Curious123]

I have a Dm600 and use the Pli image with Evocam 2.14. I did something similar to what has been explained in this thread.

http://www.digital-kaos.co.uk/forums/showthread.php?t=1496

[shirehorse99]

Does it AU

[kagon]

Does it AU

Yes, evocamd AU's.

Have you got a /var/keys/feynman.cfg file? It doesn't need to have legitimate information in it.

[shirehorse99]

Yes I have got that file in the keys folder. I deleted key entry out of keylist.txt restarted cam but no au. Any ideas

[tomcat415]

you need a file called Bruteforce cablesXML this should help with a scan not sure how to upload one on here but you can pm me and will send it to you

[Neil]

you need a file called Bruteforce cablesXML this should help with a scan not sure how to upload one on here but you can pm me and will send it to you

A 7025 will find the transponders without a cables.xml file. If checks each frequency for transponders and then searches for channels on them. You set the frequency steps yourself, I set mine to 1mhz (IIRC).

You can do the same on a 600 as well