If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Please help it says "Service Unavailable, Check Tuner Configurations!"
I do not think that it is an image issue since u have flash with 3 different images and still the same result. Problem could be the tuner faulty. The tuner is the one that u insert the cable point. Unplug and plug it back to see if it is detected by the box.
hey, thanks for that..i Think it may be burnt by the looks of it..is there any way i could get a replacement for this?
FFS lad that looks bad mine runs 24 /7 never been turned off in 2 years ,but it hasent seen heat like that
Looks like it may beyond repair ,mother board may be have had heat as well
Only way to try is lob another in ,but will cost you 30 notes off the bay
Or 15 overseas and a very long wait ,Good Luck with it ........Paul
If your Happy with the Help push the Thanx button PAUL
Unplug the tuner circled in red and clean the contact points with a cloth and spirit, reinsert back. It may help.
U may hv to unscrew out d back panel b4 u can access the Tuner module.
i got few cable tuners with issues, but able to scan all the channels but reception array very bad, causing jittering..
I can give the tuner for free, to test if the board is ok before you get a new tuner replacement.
Comment