A friend (JW) emailed me this guide a few weeks ago, and it should really help some of you noobs out there, GL
Right.. I'm compiling this guide as it took me more than 4hrs to figure it out. Everyone has been very very helpful but it takes forever to join all the information together and so, here is your guide to getting you guys back up and running:
{THIS IS A TEMP SOLUTION ONLY} - For 500C running DW2.0
First, go download a tool bar that will give you the latest Keycodes. the toolbar is called BigMAQ toolbar which can be found here: LOOK FOR BIGMAQ TOOLBAR in google. This is a useful tool that gives you the latest keys.
Next you need to know who your provider is: How do you find out? Keep reading..
1) On your Dreambox, its best to start again and delete any old keys you have.
By Davido123
1. Press Yellow
2. Select Tuxbox Commander
3. Press down arrow (9 Times) until you highlight “var” in LEFT window.
4. Press OK
5. Press down arrow (3 Times) until you highlight “keys”
6. Press OK
7. Press down arrow (4 Times) until you highlight “Keylist.txt”
8. Press 4 (to edit the file)
9. Delete ALL the lines by pressing the RED button.. YES all the lines..
10. Once you have deleted all the lines, press the EXIT button on the remote and save.
11. Keep exiting / saving untill you are back onto your blank screen.
Now we need to update your keys given to you by your Provider (Virgin etc). By doing this update, it will give you a hint of who your old provider was:
By Boxfrog
1. Go to a blank channel that was working.
2. Press the blue button
3. Now click ok to restart your EM CAMD 2.12
4. Leave it around 1min.
This has now created some new keys. Looking at these keys you only need to change the part that is incorrect by verifying on the toolbar you downloaded. There will only be a max of around 1 or 2 digits that is wrong.
3) Go back into TuxCommander to your keyfile.txt (follow the above instructions to get to the key file)
4) Match the key to the BigMAQ's toolbar keys that are updated regularly. Go through all the providers on the toolbar and match the one that closets resembles your current key.
5) Save and exit
6) Now you need to disable autoupdate ensuring you dont loose what you have changed..
(Additional, they just tell you to download keymaster now, get it at this link: http://www.digital-kaos.co.uk/forums...ys-here-12850/ )
By Davido123
1. Press Yellow
2. Select Tuxbox Commander
3. Press down arrow (9 Times) until you highlight “var” in LEFT window.
4. Press OK
2. Press down until you highlight "camd_cfg"
3. Press "4"
4. Press Down 18 Times to: line says A: { 01 }
5. Press OK
6. Press Right 6 times to highlight "1"
7. Change to "0"
8. Press OK to make the change.
9. Press Exit
10. Press Red (to save changes)
11. Press Exit
12. Press Red (to save changes)
13. Press Exit
Final step:
Press the blue button
Now click ok to restart your EM CAMD 2.12
You should now see your channels..
Right.. I'm compiling this guide as it took me more than 4hrs to figure it out. Everyone has been very very helpful but it takes forever to join all the information together and so, here is your guide to getting you guys back up and running:
{THIS IS A TEMP SOLUTION ONLY} - For 500C running DW2.0
First, go download a tool bar that will give you the latest Keycodes. the toolbar is called BigMAQ toolbar which can be found here: LOOK FOR BIGMAQ TOOLBAR in google. This is a useful tool that gives you the latest keys.
Next you need to know who your provider is: How do you find out? Keep reading..
1) On your Dreambox, its best to start again and delete any old keys you have.
By Davido123
1. Press Yellow
2. Select Tuxbox Commander
3. Press down arrow (9 Times) until you highlight “var” in LEFT window.
4. Press OK
5. Press down arrow (3 Times) until you highlight “keys”
6. Press OK
7. Press down arrow (4 Times) until you highlight “Keylist.txt”
8. Press 4 (to edit the file)
9. Delete ALL the lines by pressing the RED button.. YES all the lines..
10. Once you have deleted all the lines, press the EXIT button on the remote and save.
11. Keep exiting / saving untill you are back onto your blank screen.
Now we need to update your keys given to you by your Provider (Virgin etc). By doing this update, it will give you a hint of who your old provider was:
By Boxfrog
1. Go to a blank channel that was working.
2. Press the blue button
3. Now click ok to restart your EM CAMD 2.12
4. Leave it around 1min.
This has now created some new keys. Looking at these keys you only need to change the part that is incorrect by verifying on the toolbar you downloaded. There will only be a max of around 1 or 2 digits that is wrong.
3) Go back into TuxCommander to your keyfile.txt (follow the above instructions to get to the key file)
4) Match the key to the BigMAQ's toolbar keys that are updated regularly. Go through all the providers on the toolbar and match the one that closets resembles your current key.
5) Save and exit
6) Now you need to disable autoupdate ensuring you dont loose what you have changed..
(Additional, they just tell you to download keymaster now, get it at this link: http://www.digital-kaos.co.uk/forums...ys-here-12850/ )
By Davido123
1. Press Yellow
2. Select Tuxbox Commander
3. Press down arrow (9 Times) until you highlight “var” in LEFT window.
4. Press OK
2. Press down until you highlight "camd_cfg"
3. Press "4"
4. Press Down 18 Times to: line says A: { 01 }
5. Press OK
6. Press Right 6 times to highlight "1"
7. Change to "0"
8. Press OK to make the change.
9. Press Exit
10. Press Red (to save changes)
11. Press Exit
12. Press Red (to save changes)
13. Press Exit
Final step:
Press the blue button
Now click ok to restart your EM CAMD 2.12
You should now see your channels..
was just editing that bit when ya posted 
Comment