How do I rescan on a Eurovox 1100

[wellseytkd]

How do I rescan with a Eurovox 1100? It doesn't seem to be working Ive set the rate to my area but it scans within seconds and doesnt put any channels in?


cheers
A

[smoggy]

have you put in the start and stop frequencies 100.00 start 870.00 stop

[wellseytkd]

do I do this in power scan?

[smoggy]

yes, put in stop and start frequencies and your symbolrate in first box put o in other symbolrate boxes and scan on step 8

[wellseytkd]

in start and stop frequencies i put 739 and 739 in symbol rate i put in 6887 in the frst box and the rest 0 and the step 8mhz and it found no channels

[stiffler]

sorry to jump in on your post, some chanels have gone on my ex1100 and im teeside based. Do I need to rescan or reflash the box?

Tried power scanning but to no avail. Am I doing something wrong?

[smoggy]

in start and stop frequencies i put 739 and 739 in symbol rate i put in 6887 in the frst box and the rest 0 and the step 8mhz and it found no channels

I'm not surprised as you are scanning only one frequency that probably has no channels associated with it.
Start = 100.00 Stop = 870.00

[smoggy]

sorry to jump in on your post, some chanels have gone on my ex1100 and im teeside based. Do I need to rescan or reflash the box?

Tried power scanning but to no avail. Am I doing something wrong?

You only need to rescan but do a factory default reset first to remove all the dead channels

[wellseytkd]

Ok Ive scanned with sybom rate 6887 and from freq 100 to 870 and still nothing :s

[stiffler]

same, nothing

[smoggy]

Ok Ive scanned with sybom rate 6887 and from freq 100 to 870 and still nothing :s

is 6887 the correct symbolrate for your area (what area are you)

[smoggy]

same, nothing

when you say nothing do you mean you are getting no channels at all, if so have you got a live feed and are the cables in the correct sockets

[wellseytkd]

nottingham area so my symbol rate is 6887 and freq 739 is that no correct?

[wellseytkd]

im not gettin any channels at all after last nite. the box was working fine last nite and now I have no channels so im trying to do a rescan but still no luck. I will double check the cables now

[wellseytkd]

all cables seem to be fine, none jhave come lose from the splitter