no signal on eurovox

[dev00100]

i didnt do reset cause there was no glasgow or ntl on there
sorry

[wshand]

Thats what I did, but now I cant get the channels back even with a service unknown message !

[badapple]

M8 thats what you should have done first.
Go into menu system and do a clear data and factory reset and then a full re-scan.

[wshand]

m8, have you checked to make sure the emulation is enabled?

Are you able to view FTA channels?

Whats emulation ?

[wshand]

i didnt do reset cause there was no glasgow or ntl on there
sorry

I done mine using Edinburgh TW but not sure if that would work for you ?? Listen to Bad Apple he'll know way more about these things than i do !

[dev00100]

right
it has came back on but the numbers and channels are all over the place but at least i have ity back in
thanks for all your help very much appreciated just do a full power scan then go to the high channels ans all is there

[wshand]

Well done you ! I'll keep trying, it seems my higher frequency signal strength is really weak....been at this for about 2 hours, shoulda went to the pub to watch footie!

[badapple]

right
it has came back on but the numbers and channels are all over the place but at least i have ity back in
thanks for all your help very much appreciated just do a full power scan then go to the high channels ans all is there

Well done m8 you finally managed
The channels will be in different order now. If you want, you can sort them out on your PC using this tool>Digital Kaos - Downloads - voxer eurovox 1 . 2 installers and then download the channel list back to your box.

You should also try and update the box to the latest firmware as this will auto update the codes for you.
Have a read here>http://www.digital-kaos.co.uk/forums...-eurovox-9790/

[wshand]

Right now that Dev is sorted can anyone help me ?

I've done a factory reset, made sure my emmulater is enabled, done a powerscan and still not all channels.....When scanning it seems scan 1 - 40 but when it gets past 20 and the frequency is higher the level and quality are less than 20%

[NMc106]

How is that you enable you "emulator"?

Thanks

[wshand]

How is that you enable you "emulator"?

Thanks

Press menu ,select language settings, press 1968 twice, emulation box will appear, use arrow down to highlight and ok to change disable/enable.

[NMc106]

Press menu ,select language settings, press 1968 twice, emulation box will appear, use arrow down to highlight and ok to change disable/enable.

When I press 1968 once "emulation" appears where I can then select enable/disable. If I key in 1968 again an "Irdeto/BetaCrypt" page appears with lots of blank lines. If I click ok a window appears with "Provider", "Key" & "Key data". I have the option to type in numbers but I have no idea what to type?

Thanks.

[NMc106]

Is there any chance of an Edinburgh CDF?

What symbol rate is Edinburgh aswell?

Thanks

[wshand]

sorry, when you press it twice that is where you can manually input codes. If you have an up-to-date box with latest firmware it should automatically update.

Telepest is what I have, 5a 01 and the codes for 00 and 01 can be downloaded from BigMaQ toolbar

[wshand]

Is there any chance of an Edinburgh CDF?

What symbol rate is Edinburgh aswell?

Thanks

My symbol rate is 6952.

see this post http://www.digital-kaos.co.uk/forums...ol-rate-18032/