Digivox Firmware AU Fixes

[dave6195]

I have a strange problem, it more annoying than anything. My digivox XL is working fine but for some reason Im missing around 10 channels that I had last week (mostly music channlels). Ive factory reset and done a full automatic scan but it hasent fixed it. Anyone ever have this problem?

[cactikid]

usually factory reset works,are u using a splitter yes remove it and redo,do u get all ur channels back,emu to on.
at times channels move frequency hence the factory reset and scan,if a transponder goes down all channels on that stop until repaired maybe 4 working days.

[razzle]

v4300 download

Hi cactikid - where can I get hold of this download? v4200 works fine for the auto update, but I've lost any channel sorting, etc. Cheers.

[cactikid]

Hi cactikid - where can I get hold of this download? v4200 works fine for the auto update, but I've lost any channel sorting, etc. Cheers.

i have set pm to admin stating all digivox files old and to update downloads for all 3 boxs
the new firmware will hard code list of channels so no more moving.

[bajanboy]

cactikid
I haved tryed what you said but with no luck using v4200 = ((v04-1.0001bk)) Dated 29-nov-08,
For some reason guide stills says 5000 and Time & Date is also coming up wrong.
Was looking for the v4300 Dated 01-01-09 that you mention but cant seem to find it any idea where to look for it???
Thanks

[cactikid]

if u had the v2.500,2.600,2.800 on working there maybe go back
and try them again,as they no longer work here we have to keep updating,they might have older ones in downloads archives
.

[orlaithcullen]

Digivox xl (black) help

hello, can someone please help me. i seemed to download the wrong firmware onto my digivox.

i have tried several times to flash with correct firmware but still saying "flash update fail", I am unable to do a factory reset on the box as nothing comes up when connected to the tv.

Is there any firmware for doing a factory reset or anyway of doing a factory reset without using the tv?

anyone out there with any ideas?? please help. thanks

[cactikid]

have u flashed before using same cables reflash again u can use v1240 uk or v1250 for irl,load file into loader with box powered off,press download and power on box,let it load and box reboots,safe to unplug cables,

[Jazz]

i cant get this to work, keep getting a message saying
fail to open com-port, last error, the system cannot find the file specified, tried all i could, any help would be appreciated,

i downloaded the downloader 10, and the digivoxxl 1240_api

thanx in advance

J

[cathalmccann1st]

i have the same problem 1004 does not work. think it needs to be flashed

[bugaloo41]

i have the same problem 1004 does not work. think it needs to be flashed

make sure when you go to system info that you press ok then 1004.

[cathalmccann1st]

tried that but ot just wont work. i have another digivov xl the exact same as this one and 1004 works and i have often manulaly chaged the keys but on this one when i punch in 1004 nothing happens. any ideas

[cactikid]

m.ight need updating

[dhillon297]

need help

i flashed new firmware on to my digivox and it scans fine, and i turn EMU on, but it still says updating ? what am i doin wrong ?

[cactikid]

all boxes have to update to find new data.what is ur problem