Help needed confused

[faflefevre]

is your vm bb close to you box.
if so why dont you turn off the power to your modem and disconnect the signal feed to the modem and plug the feed into your box then you will no for sure..
we have repaired kvs with no signal issues before caused by a faulty tuner.
im not saying it will be the cause but it could be

[kyladog]

is your vm bb close to you box.
if so why dont you turn off the power to your modem and disconnect the signal feed to the modem and plug the feed into your box then you will no for sure..
we have repaired kvs with no signal issues before caused by a faulty tuner.
im not saying it will be the cause but it could be

yeh i have tried still no joy just won't pick up net Id keeps saying same old bollox"already exists"it does seem to me that they have dropped my signal,

[arky4]

I presume when id net already exsits appears, you click on your correct id for your location

[kyladog]

I presume when id net already exsits appears, you click on your correct id for your location

No it won't find any to let you click on

[faflefevre]

take it round a friend or family members house and try it there i would have thought if your bb is working the signal should be able to pick up the network id but if you take it to another house at least you will no for sure

[DW190]

,at this rate i might break rules and go legit ( heaven forbid )

Or the sat route.

[kyladog]

Or the sat route.

Yeh that's an option

[LDG]

hello i am still having trouble with this, here is what happens, ive downloaded the flash program which was linked on here, and the bin file, when i go to click start this pops up

cannot open serial com port 1
please check if the com port has the following parameters
baudrate 115200 bps
parity no parity
databyte - 8bit data
stop bit 1

i am using null cables to try this out, my laptop is wifi would i need a ether net from the bb modem to my laptop
thanks

[kyladog]

hello i am still having trouble with this, here is what happens, ive downloaded the flash program which was linked on here, and the bin file, when i go to click start this pops up

cannot open serial com port 1
please check if the com port has the following parameters
baudrate 115200 bps
parity no parity
databyte - 8bit data
stop bit 1

i am using null cables to try this out, my laptop is wifi would i need a ether net from the bb modem to my laptop
thanks

change com port 1 to another com port ,ie com port 2 com port 3 etc until ones accepted

[LDG]

change com port 1 to another com port ,ie com port 2 com port 3 etc until ones accepted

So nothing to do with my laptop using wifi and not needing ethernet to box to bb, then ethernet to laptop to bb?
thanks.

[kyladog]

So nothing to do with my laptop using wifi and not needing ethernet to box to bb, then ethernet to laptop to bb?
thanks.

No mate its not

[LDG]

No mate its not

tried all thirty two mate, none work, same thing it says.

thanks

[LDG]

anyone know?

[DW190]

anyone know?

Are you using a USB to Serial port adaptor?

[LDG]

Are you using a USB to Serial port adaptor?

no sir, please explain?
Just a null modem cable, which is doing nothing.