Starview 5 USB II

[larryoke]

Larryoke / Cactikid

Retried the firmware on the usb via moving the folder rather than copy/paste and it worked!!!!!!!!!!!

I got the secret menu up and turned the keycode on - yes!! or so i thought checked the latest codes on Nagravision and all ok and made sure settings were for TW.

The problem i have now got is after picking a $ channel the box then defaults to code 54 01 on the provider settings and TW is 5A 01 - i re enter TW coode of 5A 01 and store but then when I exit and try a channel it is ok but then when I change channel the screen goes blank, so I then go back into the keycode menu in nagravision and it has defaulted back to 54 01 which is the incorrect provider.

Thought we had cracked it and now this !! Any ideas????

It will always default to 54 01 but I can't see what your problem is!! Now that the firmware is installed try starting again with menu > factory settings (this will not affect the firmware) > ok on remote > autoscan on TW > when 100% exit > press menu 1570 & turn keycode back on > exit again then select a $ channel (I would suggest ssp1) and it should update

[matrixit]

Hi Guys,
did you get it working, smag any luck?

[smag19]

It will always default to 54 01 but I can't see what your problem is!! Now that the firmware is installed try starting again with menu > factory settings (this will not affect the firmware) > ok on remote > autoscan on TW > when 100% exit > press menu 1570 & turn keycode back on > exit again then select a $ channel (I would suggest ssp1) and it should update

Hi Larryoke

Followed the instructions to the letter and it worked but as we went into a couple of the channels SSP1 & Film channels they came up ok but after a couple of minutes they kept on freezing and you couldn't unlock unless you changed channel ??

Any ideas??

[larryoke]

You are certainly having problems!! try making a note of the frequency, delete the channel then do a manual scan on the noted frequency, hope you get sorted soon.

[kwame eric]

Hey...can anyone help our Box is just not responding to any rescan or anything.......not sure what to do next i remember something bout downloading a tool bar but im just so confused........can any one help please????