usb loader gx problem

[sam9s]

Ok mate try this, first of all make sure you don't have anything to do with usbloader gx on your wii or on your sd card then put this apps folder onto the sd card, put the card into the wii and launch hbc you should see usb loader gx app. Launch that from inside hbc and let me know how you get on shout up is this link doesn't work it's the first time I've tried it http://dl.dropbox.com/u/64422396/apps.rar

Hi highlander,

I am also new to all this and just bought a wii, (system menu 4.3E) I have hacked it and loaded the HBC and emulators are working fine. Now even I am getting the same error "download failed: HTTP/1.1 404 Not Found" while installing the loader GX. I tried your uploaded GX loader file and I was able to see Loader gx app under HBC. HOw ever when I try to load it it gives me the error .... "USB Loader requires atleast cIOS 222 or 245-250."

I then followed your this post /......

Here you go bowie http://dl.dropbox.com/u/64422396/gx%...0and%20mmm.rar Extract this to the sd card that has the working gx on it, you then drag the mmm folder into the apps folder. put the sd into the wii and launch hbc, form there start mmm (multi mod manager) navigate down to reload ios (bottom of the list i think) then select 236 from the options...once reloaded go to wad manager and select it, now press "a" to select forwarder wad and "a" again to install it. Exit mmm and hbc and go to the main wii screen, you should now have a gx channel on your main screen click that and gx should now load properly for you.

Now in this when I navigate to reload ios I do not see the option 236 there. I see 3,4,9 ...uptill 70, 80 and then 222, 223, 249,250 and last 254. But if i try to load 222 or 223,249,250 it says "Not loading stu IOS" On 254 it just hangs on reloading IOS254 and I have to power off it to bring it online .....

Can you guide me, how to get GX Uploader working ....

Any help would be highly appriciated .....

Thanks in advance
regards
sammy

[ck-ok]

Hi highlander,

I am also new to all this and just bought a wii, (system menu 4.3E) I have hacked it and loaded the HBC and emulators are working fine. Now even I am getting the same error "download failed: HTTP/1.1 404 Not Found" while installing the loader GX. I tried your uploaded GX loader file and I was able to see Loader gx app under HBC. HOw ever when I try to load it it gives me the error .... "USB Loader requires atleast cIOS 222 or 245-250."

I then followed your this post /......

Now in this when I navigate to reload ios I do not see the option 236 there. I see 3,4,9 ...uptill 70, 80 and then 222, 223, 249,250 and last 254. But if i try to load 222 or 223,249,250 it says "Not loading stu IOS" On 254 it just hangs on reloading IOS254 and I have to power off it to bring it online .....

Can you guide me, how to get GX Uploader working ....

Any help would be highly appriciated .....

Thanks in advance
regards
sammy

what tutorial did you follow?

try installing Digital Kaos - Downloads - ios236 v54321 wad so you can follow h-hs guide it will also help if you post a Digital Kaos - Downloads - sysCheck v2.1.0 Beta 11

[happy_highlander]

what tutorial did you follow?

try installing Digital Kaos - Downloads - ios236 v54321 wad so you can follow h-hs guide it will also help if you post a Digital Kaos - Downloads - sysCheck v2.1.0 Beta 11

It sound as though he has stubbed out all vulnerable ios ck so your second link of a syscheck will probably be his best bet so that we can make sure that's what has happened

[ck-ok]

It sound as though he has stubbed out all vulnerable ios ck so your second link of a syscheck will probably be his best bet so that we can make sure that's what has happened

thats what i thought h-h sounds like he has updated

[sam9s]

Ok I was not following any tut up till now, when I kinda googled more about this and came to know that you need to have a customOS in order for GX installer to work. I then followed the followinf guide but without success ...

We Hack Wii / USB Loader

I skiped 1-4 as I already had hacked the wii. Rest were followed per the sequence. I was successfully able to delete the stub 222, and all other that the guide said to remove. But when I go to step 7 where we actually install cIOS, it seems to do its part but at the end I get the following line .....

Downloading part 1/15, SD Card . Bad Hash

and then just exits.

On step 8 it gives error ret = -2011

Now if I try to load GX Loader it gives the error .....needs unstubbed cIOS 222 v4 or 249 v9 .......and then exits.

cIOS is the one I am trying to install on step 7, but obviously somewhere something is going wrong ...

Help!

My syscheckl is as follows

sysCheck v2.1.0b11 by Double_A and R2-D2199

...runs on IOS58 (rev 6176).

Region: PAL

System Menu 4.3E (v514)

Homebrew Channel 1.0.0 running on IOS58

Hollywood v0x21

Console ID: 169610702

Boot2 v4

Found 62 titles.

Found 39 IOS on this console. 10 of them are stub.

IOS3 (rev 65280): Stub

IOS4 (rev 65280): Stub

IOS9 (rev 1034): No Patches

IOS10 (rev 768): Stub

IOS11 (rev 256): Stub

IOS12 (rev 526): No Patches

IOS13 (rev 1032): No Patches

IOS14 (rev 1032): No Patches

IOS15 (rev 1032): No Patches

IOS16 (rev 512): Stub

IOS17 (rev 1032): No Patches

IOS20 (rev 256): Stub

IOS21 (rev 1039): No Patches

IOS22 (rev 1294): No Patches

IOS28 (rev 1807): No Patches

IOS30 (rev 2816): Stub

IOS31 (rev 3608): No Patches

IOS33 (rev 3608): No Patches

IOS34 (rev 3608): No Patches

IOS35 (rev 3608): No Patches

IOS36 (rev 3608): No Patches

IOS37 (rev 5663): No Patches

IOS38 (rev 4124): No Patches

IOS41 (rev 3607): No Patches

IOS43 (rev 3607): No Patches

IOS45 (rev 3607): No Patches

IOS46 (rev 3607): No Patches

IOS48 (rev 4124): No Patches

IOS50 (rev 5120): Stub

IOS51 (rev 4864): Stub

IOS52 (rev 5888): Stub

IOS53 (rev 5663): No Patches

IOS55 (rev 5663): No Patches

IOS56 (rev 5662): No Patches

IOS57 (rev 5919): No Patches

IOS58 (rev 6176): USB 2.0

IOS61 (rev 5662): No Patches

IOS80 (rev 6944): No Patches

IOS254 (rev 65281): BootMii

BC v6

MIOS v10

Report generated on 2012/03/11.

Regards
Sammy

[Keithuk]

Welcome to DK Sammy.

I am getting the same error "download failed: HTTP/1.1 404 Not Found" while installing the loader GX. I tried your uploaded GX loader file and I was able to see Loader gx app under HBC. HOw ever when I try to load it it gives me the error .... "USB Loader requires atleast cIOS 222 or 245-250."

I then followed your this post /......

Now in this when I navigate to reload ios I do not see the option 236 there. I see 3,4,9 ...uptill 70, 80 and then 222, 223, 249,250 and last 254. But if i try to load 222 or 223,249,250 it says "Not loading stu IOS" On 254 it just hangs on reloading IOS254 and I have to power off it to bring it online .....

It appears a few are getting this HTTP/1.1 404 Not Found error. I downloaded USBLoaderGX_Installer.exe from another site and it shows the same error.

When you try to run USB Loader GX from HBC it will say needs cIOS222, cIOS249 or cIOS250 as instructed install d2x v7 Final that will install all the necessary wads needed for USB Loaders.

If you want IOS236 download it and put it in the wad folder on the SD card and install it with MMM along with the other d2x v7 wads.

I see you've post the sysCheck report and as suspected you don't have the d2x v7 wads installed, do that or you will never get USB Loaders to work.

I also see you don't have PriiLoader 0.7 installed to block online and disc updates, install this.

Oh after you softmodded did you do a NAND backup straight afterwards?

[ck-ok]

if i was you i would use Digital Kaos - Downloads - modmii 4.3.4 to download your files and write you a personalised tutorial soubd like you need one
you can skip the part about homebrew channel as you already have it

[happy_highlander]

Ok I was not following any tut up till now, when I kinda googled more about this and came to know that you need to have a customOS in order for GX installer to work. I then followed the followinf guide but without success ...

We Hack Wii / USB Loader

I skiped 1-4 as I already had hacked the wii. Rest were followed per the sequence. I was successfully able to delete the stub 222, and all other that the guide said to remove. But when I go to step 7 where we actually install cIOS, it seems to do its part but at the end I get the following line .....

Downloading part 1/15, SD Card . Bad Hash

and then just exits.

On step 8 it gives error ret = -2011

Now if I try to load GX Loader it gives the error .....needs unstubbed cIOS 222 v4 or 249 v9 .......and then exits.

cIOS is the one I am trying to install on step 7, but obviously somewhere something is going wrong ...

Help!

My syscheckl is as follows

Regards
Sammy

Can't get to pc for about another half hour or so but don't go deleting any more ios until I can get a tut done for you or you are going to end up in a whole heep of sh1t.

Edit.....In fact follow the link from ck but you need to update hbc first as you are only running version 1.0.0 and should be on version 1.0.8 or you will not be able to install cios 236 properly and the rest of the updates will then fail.

[ck-ok]

h-h just checked BootMii.org seems there is a 1.1.0 which is installed by hackmii installer v1
i've not heard anything about that

[happy_highlander]

h-h just checked BootMii.org seems there is a 1.1.0 which is installed by hackmii installer v1
i've not heard anything about that

Me neither.............Away to see what i can find out

[happy_highlander]

I've just updated my hbc to the 1.1.0 version and it does register as 1.0.0 on a syscheck ck.....So he has the latest version.......

[Keithuk]

I've just updated my hbc to the 1.1.0 version and it does register as 1.0.0 on a syscheck

Did you uninstall HBC or just overwrite it?

[happy_highlander]

Did you uninstall HBC or just overwrite it?

update through hbc keith it is only syscheck that is giving the wrong version hbc is recording the correct version in the top right

[sam9s]

Welcome to DK Sammy.



It appears a few are getting this HTTP/1.1 404 Not Found error. I downloaded USBLoaderGX_Installer.exe from another site and it shows the same error.

When you try to run USB Loader GX from HBC it will say needs cIOS222, cIOS249 or cIOS250 as instructed install d2x v7 Final that will install all the necessary wads needed for USB Loaders.

If you want IOS236 download it and put it in the wad folder on the SD card and install it with MMM along with the other d2x v7 wads.

I see you've post the sysCheck report and as suspected you don't have the d2x v7 wads installed, do that or you will never get USB Loaders to work.

I also see you don't have PriiLoader 0.7 installed to block online and disc updates, install this.

Oh after you softmodded did you do a NAND backup straight afterwards?

Thanks for all the help and guidence guys ......@keithuk, I downloaded all the wads including 236 and placed them under wad folder and tried to install them using MMM and its a no go, I get the following error ...

Installing 1/1: IOS236-v54321.wad - Ticket (-2011)
Final Status - 1 did not complete

Press any button to continue, and this happens irrespective of
which wad I choose to install.

M gonna try the other method now provided by ck-ok if I do manage to understand it .....

Regards
Sammy

UPDATE :: I tried installing the same wad using the WAD manager and I get the following error

>> Installing Ticket .... ERROR! (ret = -2011)

This is the same error I got while performing step 8 of my initial tut that I was following.

[sam9s]

Can't get to pc for about another half hour or so but don't go deleting any more ios until I can get a tut done for you or you are going to end up in a whole heep of sh1t.

Edit.....In fact follow the link from ck but you need to update hbc first as you are only running version 1.0.0 and should be on version 1.0.8 or you will not be able to install cios 236 properly and the rest of the updates will then fail.

Not deleting any more ios highlander ... waiting for your specific instructions ....