usb loader gx problem

[Selarm]

Ok if you still having problems downloading USBLoaderGX_Installer.exe try this. As I've said I've just downloaded it no problem.

Sorry I've just saved this zip and it wouldn't open I've just uploaded again.

I've just try it again and it still won't open. The original zip opens perfectly.

bowie just keep trying the link until it works.

Ohhh !! Thank you so much ! I was just looking for this folder 'cause I had a problem installing USBLoader Gx... =\

Thanks a lot !

[Deathlock390]

Awsome. So, cIOS236/36 will allow me to install certains wads is this correct, for my sake i hope so and thanks for the uploader.

[happy_highlander]

Awsome. So, cIOS236/36 will allow me to install certains wads is this correct, for my sake i hope so and thanks for the uploader.

That is correct. Welcome to DK and enjoy your download

[kristinasnyder2]

same problem

my wii also says i need cios222 or the 249?? any help would be aweomse, thanks

[ck-ok]

my wii also says i need cios222 or the 249?? any help would be aweomse, thanks

try this Digital Kaos - Downloads - d2x v8 Final wad pack

[Keithuk]

Welcome to DK.

my wii also says i need cios222 or the 249?? any help would be aweomse, thanks

All USB Loaders need either cIOS222, cIOS249 or cIOS250 which you can get from d2x v7.0 Final or d2x v8.0 Final as CK has suggested. You also need IOS236 before your start.

[Henri Claytor]

Thankyou, I haven't done any updates in nearly a year.

[ddrmidgetid]

Welcome to DK Sammy.



It appears a few are getting this HTTP/1.1 404 Not Found error. I downloaded USBLoaderGX_Installer.exe from another site and it shows the same error.

When you try to run USB Loader GX from HBC it will say needs cIOS222, cIOS249 or cIOS250 as instructed install d2x v7 Final that will install all the necessary wads needed for USB Loaders.

If you want IOS236 download it and put it in the wad folder on the SD card and install it with MMM along with the other d2x v7 wads.

I see you've post the sysCheck report and as suspected you don't have the d2x v7 wads installed, do that or you will never get USB Loaders to work.

I also see you don't have PriiLoader 0.7 installed to block online and disc updates, install this.

Oh after you softmodded did you do a NAND backup straight afterwards?

this sounds like Digital Kaos - Downloads - d2x v7 Final will fix my problem... i have to wait the 15 to download it; but from what im reading i should be good;

I get that Dos 222 245-250 error:

Thanks guys!

[Keithuk]

Welcome to DK.

this sounds like Digital Kaos - Downloads - d2x v7 Final will fix my problem... i have to wait the 15 to download it; but from what im reading i should be good;

I get that Dos 222 245-250 error:

You need to post a full sysCheck report as instructed in that link before we can comment on your system?

[tlove]

Thanks for this thread, Its helped me get my GX loader working

[antonio341]

i need help mine says it needs 249 or 222 plz help

[happy_highlander]

i need help mine says it needs 249 or 222 plz help

I wish I had a pound for everytime that statement has been made and answered in this thread. Which is probably why the thread is as long as it is, some reading for you.

[Keithuk]

Me too HH.

i need help mine says it needs 249 or 222 plz help

I suppose its the first post so they can't download but I'm sure they can read the first page?

http://www.digital-kaos.co.uk/forums/f16/usb-loader-requires-least-cios-222-245-250-a-291481/

[dickballs]

Posting to get access to IOS36 v3608 which MMM wants...

[thuisje]

error on the wii

i have an error on the wii
USB loader GX needs unstubbed CIOS 222 V4 or 249 v9

i found
222=0
249=0

Who helps me? Tell me step by step? I'm not a computerfreek.