Wii 4.3E/U softmod - Using Indiana Jones - Original Adventures

[bernado]

If it doesnt work play a bit of the game,the intro and go back and give in..Done a few of these lately the first thing was you dont have to play the first level just copy the hack indy file onto the wii.
What's more, to fix this ive taken the Bootmii folder off the sd card and saved it so the Wii starts as normal.

Yes, I had managed to run the hack without issue, it was the triggering of the hack during game play, post mod, that was the thing. Hopefully all sorted now and a brilliant mod this is too

[auld yin]

Can someone please help me, as my name suggests, I'm not the youngest (or brightest) when it comes to WII. I tried all of this and put on a soft mod on 4.3E in australia. I then went to change the settings to put on the wii dark (red) format and from that point on, my screen is black. The only way i can even get close to the wii working is switching it off (holding the off button for about 10 secs), turning it on while pressing reset which gets me into the bootmii menu, that is the only way i can get into homebrew, i can't get into anyhting else. Have i fu***d it or can anyone please suggest a fix, i am ready to smash this bastard to pieces

[Lerxst]

Thanks for the tutorial. Playing the first level is the hardest part of the game. Tried copying the save games over from the SD card but it wouldn't show up in the game. Once this was done just followed the tutorial and everything worked like a champ

Just remember not to rush it and you'll be fine. Now I've got to find a spare USB hard drive!

Nice mod.

[kc57]

Excuse a noobie. I have follwoed the guide for a 4.3e and so far so good. When I get the to the second section, Install WADS, I have formatted the SD Card, extracted the Modpack and followed the instructions. When I run Launch BootMII, instead of anything starting the WII sits and flashes Blue. Have I missed anything.

[ck-ok]

Excuse a noobie. I have follwoed the guide for a 4.3e and so far so good. When I get the to the second section, Install WADS, I have formatted the SD Card, extracted the Modpack and followed the instructions. When I run Launch BootMII, instead of anything starting the WII sits and flashes Blue. Have I missed anything.

did you follow the part were it says prepare sd card?

[kr1s77]

folks i'm stuck here
Installing WADS

Now you need to install your WADS.

From the main Wii Menu screen, load HomeBrew Channel; press -HOME- on your Wii remote & select Launch Bootmii

Multi-Mod Manager will Starts (via cboot2)
IMPORTANT Never Uninstall IOS, you will brick your Wii
Select "WAD Manager" - Press A
Press (1) to "Install all Wads" - Press A
19 wads should install without any issues.
"Press any button to continue"
VERY IMPORTANT Be sure all the WADS install
If the WADS fail to install, install them 1 at a time.
Once all WADS are installed, Press B twice to return to the main menu


when i launch bootmii nothing happens apart from the 4 icons are there like when u go to do a nand back-up, pls help.

[ck-ok]

ignore (duplicate post)

did you prepare the sd card like it says in the tut?

[kr1s77]

yeah i did

[kr1s77]

sorted, just re-formatted the card and it worked, thanks

[kc57]

Sorted, went through again, all works, DL'd a couple of ISO games which worked and about to try an external USB drive. Thanks to all who set this up, excellent work. No doubt I will be pestered by relatives now :-)

[kc57]

OK, so far so good. Sodtmod worked and I have HBC plus the channels for USB and Disk. I have DL's an ISO and burnt to disk, it worked fine. I have an external USB HDD and pendrive. Both are detected by the USB channel but it cannot see any wbfs games copied to them. Also any tips on copying existing disks to my HDD. Once again thanks for the help to a noob.

[ck-ok]

OK, so far so good. Sodtmod worked and I have HBC plus the channels for USB and Disk. I have DL's an ISO and burnt to disk, it worked fine. I have an external USB HDD and pendrive. Both are detected by the USB channel but it cannot see any wbfs games copied to them. Also any tips on copying existing disks to my HDD. Once again thanks for the help to a noob.

what did you format the drive too?
what program did you use to put the iso's on the drive?
you can copy your backups to your hdd by pushing the + sign in the bottom l/h of gx screen then inserting the disc.

[Keithuk]

I'm new to this soft modding my 3.4E. I got HBC setup no problem.

sorted, just re-formatted the card and it worked, thanks

Now this is something thats bothered me, every tutorial I've read they all format the SD card before putting anything on it. Why does it have to be formatted every time if you delete all files and folders then there shouldn't be anything on there?

OK, so far so good. Sodtmod worked and I have HBC plus the channels for USB and Disk. I have DL's an ISO and burnt to disk, it worked fine. I have an external USB HDD and pendrive.

I have an external 147GB external USB drive formatted WBFS and loaded with WBFS ISO's. I now need some help to load the correct USB Loader so it will read these games? Now I rea dthere are various USB Loaders out there that work on different versions of the Wii. I have USB Loader - UJJB, USB-Loader_v1, USBLoaderGX2.0_AllinOnePackage and USBLoaderGX_1.0_Installer which one is suitable for my 4.3E?

When I try and load USB Loader GX 2.0 it says it needs to use ISO249, WAD-Manager 1.7 says

IOS249 - v65280 - STUB - Wanikoko's cIOS or STUB

so if that IOS249 is being used or setup for Wanikoko's cIOS or STUB can I overwrite it with another ISO made from NUS Downloader?

Actually my first job is to get BootMii to run before I mod anything so I can write my NAND to an SD card just in case I brick it? Now when I select BootMii from the HBC menu the screen just goes black. I'm sure I read it or seen it on a YouTube video that you have to press the power button one or two times then the reset button three times before the BootMii shows. I've pressed these buttons and number of times but I still can't get it to show up.

Can someone please give me instruction on how the backup my NAND?

[jamiesonbest]

trouble in paradise

i am in australia trying to softmod as per the guide using a 4gb sd card and using the eur indie file but when i get to the bit after playing the level where it goes to the black screen all i get is this below ps i definately have 4.3e please help

cleaning up environment... Eventhook release failed with code 0
OK.
SD card not present? (-1056964576)
sd card not found (-1056964576)
USBGecko not found
No code found to load, hanging.

[ck-ok]

i am in australia trying to softmod as per the guide using a 4gb sd card and using the eur indie file but when i get to the bit after playing the level where it goes to the black screen all i get is this below ps i definately have 4.3e please help

cleaning up environment... Eventhook release failed with code 0
OK.
SD card not present? (-1056964576)
sd card not found (-1056964576)
USBGecko not found
No code found to load, hanging.

the guide says 2gig or less use a smaller sd card