here is the LT MAX burner firmware

[samlen27]

That's why it says use verbs as they are the best media


Sent from my iPhone using Tapatalk

yes im going to but was worth a try

[maddy7]

I've got the IHAS124b. Flashed with CFW ok.
Using Gears_of_War_3_READNFO_XGD3_0800_USA_RF-XBOX360-RRoD ISO
I got three Infiniti 360 8x coasters all failed verify at 49%. These discs have always been ok before but no supprise they failed here.
I just got a Aone Plus+ Gold edition coaster failed verify at 49%. Not sure if these are the ones mentioned previously.

I am using another Aone Plus+ to burn Rage disc one. I'm going to be though. Will check in morning and report back. Has anyone had any success with Aone or Verbatims yet? Can anyone recommend a good source for Verbatims?

[martiboy]

What speed are you trying to burn at. Some people have had success with aoen discs. I always use verbs and never had any probs.


Sent from my iPhone using Tapatalk

[saj1985]

I've got the IHAS124b. Flashed with CFW ok.
Using Gears_of_War_3_READNFO_XGD3_0800_USA_RF-XBOX360-RRoD ISO
I got three Infiniti 360 8x coasters all failed verify at 49%. These discs have always been ok before but no supprise they failed here.
I just got a Aone Plus+ Gold edition coaster failed verify at 49%. Not sure if these are the ones mentioned previously.

I am using another Aone Plus+ to burn Rage disc one. I'm going to be though. Will check in morning and report back. Has anyone had any success with Aone or Verbatims yet? Can anyone recommend a good source for Verbatims?

i dont think aone discs are any good,
they burn but like you said when it comes to verification they fail at 49%

What speed are you trying to burn at. Some people have had success with aoen discs. I always use verbs and never had any probs.


Sent from my iPhone using Tapatalk

these people who say they have success with aone dics, mean only burning it,
when they try to verify it,
it simply fails at about 49%,

i've had about 6/7 coasters

the datawrite red top discs are suppose to work,
but like you say verbs is the one,
btw where you get your verbs from?

[martiboy]

I will post a link soon. I'm on my phone and don't know how to ad links. Do you use printable or non printable


Sent from my iPhone using Tapatalk

[saj1985]

I will post a link soon. I'm on my phone and don't know how to ad links. Do you use printable or non printable


Sent from my iPhone using Tapatalk

printable white ones,
kewl i'll wait for your post mate!

[martiboy]

printable white ones,
kewl i'll wait for your post mate!

Here you go mate. Never had a prob with this seller. i always get within 1-2 days. They are also the MKM003 discs so burn at 4x speed

25 VERBATIM DUAL LAYER DISCS 8X 8.5GB 240MINS PRINTABLE | eBay

[maddy7]

[QUOTE=martiboy;1301988]What speed are you trying to burn at. Some people have had success with aoen discs. I always use verbs and never had any probs.

Imgburn insists on 4x
ATAPI iHAS124 B AL0S (ATA)

W 21:29:19 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)
W 21:29:19 The drive only supports writing these discs at 4x, 6x, 8x.

Just checked and I've got a nice coaster trying to burn Rage disc one from last night so it's not the ISO.
For info the disc id for the Aones from imgburn is RICOHJPN-D01-67.

Can anyone confirm a 100% verified burn with speed, disc type and burner?

I don't mind buying Verbatims if they work. I just didn't want to buy them only to find that there is another problem. I'll try to pick some up today or tomorrow and see what happens.

[martiboy]

[quote=maddy7;1302063]

What speed are you trying to burn at. Some people have had success with aoen discs. I always use verbs and never had any probs.

Imgburn insists on 4x
ATAPI iHAS124 B AL0S (ATA)

W 21:29:19 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)
W 21:29:19 The drive only supports writing these discs at 4x, 6x, 8x.

Just checked and I've got a nice coaster trying to burn Rage disc one from last night so it's not the ISO.
For info the disc id for the Aones from imgburn is RICOHJPN-D01-67.

I don't mind buying Verbatims if they work. I just didn't want to buy them only to find that there is another problem. I'll try to pick some up today or tomorrow and see what happens.

when burning do you have opc ticked or unticked. For 4x speed it should be ticked. get hold of a couple of verbs you will never look back

[saj1985]

Here you go mate. Never had a prob with this seller. i always get within 1-2 days. They are also the MKM003 discs so burn at 4x speed

25 VERBATIM DUAL LAYER DISCS 8X 8.5GB 240MINS PRINTABLE | eBay

you only ever buy from him?

Imgburn insists on 4x
ATAPI iHAS124 B AL0S (ATA)

W 21:29:19 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)
W 21:29:19 The drive only supports writing these discs at 4x, 6x, 8x.

Just checked and I've got a nice coaster trying to burn Rage disc one from last night so it's not the ISO.
For info the disc id for the Aones from imgburn is RICOHJPN-D01-67.

Can anyone confirm a 100% verified burn with speed, disc type and burner?

I don't mind buying Verbatims if they work. I just didn't want to buy them only to find that there is another problem. I'll try to pick some up today or tomorrow and see what happens.

my disc ID is the same too mate

[maddy7]

[quote=martiboy;1302071]

when burning do you have opc ticked or unticked. For 4x speed it should be ticked. get hold of a couple of verbs you will never look back

Yes it is ticked.

[maddogs]

Been looking at TX forums and even people using verbs are having problems only verifying at 49%.

[saj1985]

Been looking at TX forums and even people using verbs are having problems only verifying at 49%.

yea your right bud

[RouseyUK]

I have updated my drive with this firmware but the drive will not recognise any disk i put in, has anyone got any idea's

[martiboy]

I have updated my drive with this firmware but the drive will not recognise any disk i put in, has anyone got any idea's

When you say the drive. Is that the burner drive or xbox drive. If its the burner it sounds like a bad flash. Start from the begining again.