pc wont boot

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • spondulick
    DK Veteran
    • Dec 2008
    • 677

    #31
    nothing on motherboard disk ,what do you mean swapping stuff.

    Comment

    • spondulick
      DK Veteran
      • Dec 2008
      • 677

      #32
      cant get anything on monitor mcgeoff.

      Comment

      • mcgeoff
        Member
        • Sep 2008
        • 63

        #33
        Have you tried another graphics card

        Comment

        • cunny
          V.I.P. Member
          • Jan 2009
          • 4915

          #34
          unplug all drives from motherboard an try another graphics card.
          sigpic

          "Make it idiot proof and someone will make a better idiot."

          Comment

          • davemac82
            Senior Member
            • May 2008
            • 279

            #35
            Sounds to me like you have pushed something either ram or cpu from its seating. I would......

            1. Remove board from case.
            2. remove cpu fan and cpu. and any other hardware ie ram
            3. replace board into case.
            4. re seat cpu and fan
            5. fit original ram to slot 0
            6. connect power supply
            7. try and boot computer with only vga cable and power cable plugged in.
            sigpic

            Comment

            • sattboy
              Member
              • Mar 2009
              • 84

              #36
              Originally posted by spondulick
              sorry to mess u about but sound is beep pause beep pause and so on
              hi m8 re-install the original mem stick boot it up,while booting hit F2 or DEL and enter bios and see if bios is registering any mem at all you may have to set bios to defualt settings this should work.always keep mem to same type and value ie you should always have matched pairs.cheers m8

              Comment

              • davemac82
                Senior Member
                • May 2008
                • 279

                #37
                Originally posted by sattboy
                hi m8 re-install the original mem stick boot it up,while booting hit F2 or DEL and enter bios and see if bios is registering any mem at all you may have to set bios to defualt settings this should work.always keep mem to same type and value ie you should always have matched pairs.cheers m8
                He cant get the board to post so how could he possibly access a bios!!
                sigpic

                Comment

                • cunny
                  V.I.P. Member
                  • Jan 2009
                  • 4915

                  #38
                  Keep it to the basics hey guys, try another gfx card with orig dimm of memory in, unlug everything else, if that fails, try newer memory, if that also fails given everything thats been tried then it sounds like the board as died.
                  sigpic

                  "Make it idiot proof and someone will make a better idiot."

                  Comment

                  Working...