nothing on motherboard disk ,what do you mean swapping stuff.
pc wont boot
Collapse
X
-
-
-
Sounds to me like you have pushed something either ram or cpu from its seating. I would......
1. Remove board from case.
2. remove cpu fan and cpu. and any other hardware ie ram
3. replace board into case.
4. re seat cpu and fan
5. fit original ram to slot 0
6. connect power supply
7. try and boot computer with only vga cable and power cable plugged in.sigpicComment
-
hi m8 re-install the original mem stick boot it up,while booting hit F2 or DEL and enter bios and see if bios is registering any mem at all you may have to set bios to defualt settings this should work.always keep mem to same type and value ie you should always have matched pairs.cheers m8Comment
-
He cant get the board to post so how could he possibly access a bios!!hi m8 re-install the original mem stick boot it up,while booting hit F2 or DEL and enter bios and see if bios is registering any mem at all you may have to set bios to defualt settings this should work.always keep mem to same type and value ie you should always have matched pairs.cheers m8sigpicComment
-
Keep it to the basics hey guys, try another gfx card with orig dimm of memory in, unlug everything else, if that fails, try newer memory, if that also fails given everything thats been tried then it sounds like the board as died.sigpic
"Make it idiot proof and someone will make a better idiot."Comment
Comment