*New* Redline T7600 HD

[Ryn]

Thanks for confirming that Tony.

Can you point me to a thread that deals with scrambled channels?

As I said, I'm totally new to all this.

[dunia83]

HEy I have a big problem, I have reset my reciever to factory setting and now I have lost everything , it does not have supersetting anymore... notthing how do I get it back? MY reciever is a Redline T7700 HD mini

[tony34567]

HEy I have a big problem, I have reset my reciever to factory setting and now I have lost everything , it does not have supersetting anymore... notthing how do I get it back? MY reciever is a Redline T7700 HD mini

Hi Dunia83,
Just goto Menu/settings/enter upgrade then press 6969 from your remote super settings will appear.

Thanks

[tony34567]

Thanks for confirming that Tony.

Can you point me to a thread that deals with scrambled channels?

As I said, I'm totally new to all this.

hi Ryn, Maybe Satsmo or any other member who knows will help you.

Thanks

[Ryn]

Thank you Tony.

[Me2]

This is great. Thank you for your valuable support, Tony mate.

[visiondvd]

Bad Flash

I via usb tried a firmare update, mismatched, now the box boots only to a loading screen searching for update via ts, then fails.kinda seems its stuck .
Any ideas on how to flash this box via rs232 ?
What program works for rs232 etc, tried a few but no joy.
Cheers

[tony34567]

Redline T7600 recover bad flash via usb

I via usb tried a firmare update, mismatched, now the box boots only to a loading screen searching for update via ts, then fails.kinda seems its stuck .
Any ideas on how to flash this box via rs232 ?
What program works for rs232 etc, tried a few but no joy.
Cheers

Hi Visiondvd,
Just rename the latest t7600 firmware to rom.bin attached,
format usb and add rom.bin into usb. switch off receiver , attach usb to receivers front port, press and hold menu button, switch On receiver Flashing will start automatically and you will see the progress on Tv screen. At the end a successfully message will appear , remove usb .
Done

Thanks

[visiondvd]

Alive and kicking again thanks to Tony

Thanks very much for that ,,cured back amongst the living.
Thanks again
Supplier just emailed me the same info,good supplier, email me support at this time of night.
Do channel list for 7600 work with any redline or are they box specific?

[tony34567]

Redline Ts series channel list works in all Ts3000/300/200.
The chip is different for T7600 so can't use Ts channel list in T7600 or vise versa.

Thanks

[visiondvd]

Thanks again Tony

[BATFINK547]

Just got one of these boxes, pretty quick little box, redline 3000, thanks for channel lists that will save me some time

[BATFINK547]

How do i get the channel list onto the box?

[tony34567]

How do i get the channel list onto the box?

Mate This thread is for Redline T7600 HD.
Their is another thread discussing Redline Ts3000 channel list

http://www.digital-kaos.co.uk/forums/f11/22-10-12-channel-list-redline-ts-3000-hd-300153/

thanks

[BATFINK547]

One more question if anybody can help? i was messing with the channel lists, for some reason now when i push "channel up" button or "channel down" button i am always taken to channel "0001" so to get another channel i have to go through the EPG rather than just flick through the channels? really annoying