Openbox S10 Sky EPG

[custard]

Thanks for the reply mate, did this but still nothing. I used Hooleys FW update and OP C/List.

. check that you are still networked. this can be checked by pinging the box from your pc.

is the cl*ne showing as 'offline' or 'no active'?

[Jackal187]

. check that you are still networked. this can be checked by pinging the box from your pc.

is the cl*ne showing as 'offline' or 'no active'?

It's showing offline, source confirms connection.

[custard]

It's showing offline, source confirms connection.

If it shows as offline then it points to the cl*ne been entered incorrectly or the provider is not available.

you could try pinging the server. google cccaminfophp.

[jackos5]

are these in order of sky i.e 101 bbc1 102 bbc2 and so on cheers

[Gunny2k]

Yes, I am wondering this also. Not sure which to download?

[Jackal187]

If it shows as offline then it points to the cl*ne been entered incorrectly or the provider is not available.

you could try pinging the server. google cccaminfophp.

In the end i had to reflash original FW, will do another attempt over the weekend.

Cheers

[stavtoon]

I really liked the look of this FW and channel list for the few minutes i had it until i got the dreaded "this box is a clone" message so a new openbox s10 from a UK retailer is winging its way to me.This new box should be original yes? dont know if im allowed to name the retailer or not but it sells SAT and CableMy question is will i then be ok to upgrade to this FW if the box is original im now very wary about doing this.

[smirnoff_rules]

cant u use clone safe f/w on these then

[smirnoff_rules]

To check if your OpenBox S9 is an original or clone, just follow the instructions below:
This is the correct procedure to identify if your OpenBox S9 is an original or clone.

What is CCID ?
(Chip/Smart Card Interface Devices)

Before you continue, make sure there is no smartcard inserted in the receivers card slot.
Here is an example of the CCID 0100: 98A1 the CCID is 98A1 which means the receiver is a genuine OpenBox S9
The first part [0100] is the CAID which can be ignored, it only displays that as your also in the same section for accessing the smartcard info, and without a smartcad inserted, the default will be 0100

Instructions:
Goto Menu -> Tools -> Information now press 7 7 7 7 7 7 on the remote. [certain firmware may require you to press 8 8 8 8]
If the CCID is one of the following "00d0/00ea/085b/0d0c/98a1/98f2/9cf4/9d1a***8220; congratulatation, your HD Receiver is original!!
so you may upgrade any new firmware to experience more new functions.

If your STB`s CCID is not one of the above.
Please do not upgrade any new firmware, otherwise your HD receivers will be killed!!

The image below has been manipulated, to enhance the text.
As you can see, it's only the second part of the CCID that you need to verify

[stavtoon]

cant u use clone safe f/w on these then

sorry im all new to these boxes and dont understand what you mean.

[smirnoff_rules]

To check if your OpenBox S9 is an original or clone, just follow the instructions below:
This is the correct procedure to identify if your OpenBox S9 is an original or clone.

What is CCID ?
(Chip/Smart Card Interface Devices)

Before you continue, make sure there is no smartcard inserted in the receivers card slot.
Here is an example of the CCID 0100: 98A1 the CCID is 98A1 which means the receiver is a genuine OpenBox S9
The first part [0100] is the CAID which can be ignored, it only displays that as your also in the same section for accessing the smartcard info, and without a smartcad inserted, the default will be 0100

Instructions:
Goto Menu -> Tools -> Information now press 7 7 7 7 7 7 on the remote. [certain firmware may require you to press 8 8 8 8]
If the CCID is one of the following "00d0/00ea/085b/0d0c/98a1/98f2/9cf4/9d1a? congratulatation, your HD Receiver is original!!
so you may upgrade any new firmware to experience more new functions.

If your STB`s CCID is not one of the above.
Please do not upgrade any new firmware, otherwise your HD receivers will be killed!!



so if yours isnt a clone its a software fault and a delete and rewite should work

[stavtoon]

To check if your OpenBox S9 is an original or clone, just follow the instructions below:
This is the correct procedure to identify if your OpenBox S9 is an original or clone.

What is CCID ?
(Chip/Smart Card Interface Devices)

Before you continue, make sure there is no smartcard inserted in the receivers card slot.
Here is an example of the CCID 0100: 98A1 the CCID is 98A1 which means the receiver is a genuine OpenBox S9
The first part [0100] is the CAID which can be ignored, it only displays that as your also in the same section for accessing the smartcard info, and without a smartcad inserted, the default will be 0100

Instructions:
Goto Menu -> Tools -> Information now press 7 7 7 7 7 7 on the remote. [certain firmware may require you to press 8 8 8 8]
If the CCID is one of the following "00d0/00ea/085b/0d0c/98a1/98f2/9cf4/9d1a***8220; congratulatation, your HD Receiver is original!!
so you may upgrade any new firmware to experience more new functions.

If your STB`s CCID is not one of the above.
Please do not upgrade any new firmware, otherwise your HD receivers will be killed!!

The image below has been manipulated, to enhance the text.
As you can see, it's only the second part of the CCID that you need to verify

Did all that mate and it showed as original but was still killed,ive ordered a null cable and are going to try to revitalise it and maybe use it in a bedroom.Once i do have an original will i be able to upgrade without worries.cheers

[smirnoff_rules]

if u had the same problem with a none clone l would be worried m8

[stavtoon]

i did think i was saving money by going the China routebut its cost double

[smirnoff_rules]

dm800 would of been a better choice because of all the clone safe images m8