Recover Dead Skybox/Openbox Flash Using Serial RS232 Null modem Cable

[bluefannyanne]

hi is there anything for skybox f3 like this

[kikkox]

Finally i solve my problem and i flash my s16 !!!!
I use another USB to Serial adapter (Profilik) and all work properly!
What's the last firmware avaible for s16?

[kikkox]

Thanks sb18080! I just tried but nothing same result.in the afternoon i looking for a pc with native com port.

[sb18180]

try changing the comm port to a different one both on the pc and recovery software see if that makes a difference

[kikkox]

Hi to all!
I have one chinese clone openbox s16 hd that worked very nice still yesterday...then i put on USB one channel setting file .udf of S9 setting.
The receiver complete the loading setting but after looping reboot:the onboard dispaly show: ON -START-OOO1-ON-START-OOO1.......
I read this post and i trying to flash trough RS232 port with the upgrade tool version 2.0.0f 17-04-2009 but:
the connection i thinking is ok because the tool show "sync to serial port -get protocol version & chunk -Error no packet receive" but the sat receiver display show "Conn"
Anyone can help me?
Thanks a lot.
and...sorry for my poor english...

[mbovo]

thanks for all the advice, I'll try to repair my s10

[khannii35164]

dont work!

[DOUGALMCD]

English please.

[mastermo]

ivch will was downloaden!!!!!!

[mrzaame]

Hi guys i am new here ... i have an Obox S11 and i have been upgrading since i got it last year ... i mean i've tried different software on it ... its not a clone ... but today after i flashed the best working software to the box again via USB to my surprised it stopped working .... the box will power up ... Led says BOOT ... then it says - - ... it stays here and wouldn't move forward .. what the hell is happening guys ...

i have a null modem cable and i tried flashing it again with any working software ... via eromupgrade but no chance guys ... has any 1 come across this before ???

[slugworth]

everything you need is here

[scaricone2011]

hi, i am new in the sector
i have bricked my sp
please help me!

tanks

[dmmacvicar]

Bought a joblot of old/faulty boxes of Ebay. Just fixed a "dead" S11 which has paid for the joblot already. Now to get the 3 Dreambox 500s going Worked eventually when I went into device manager and changed the COM port settings to the same as the RS232 flasher prog. Using PC onboard serial port

[jaybou]

Bootloop 97 fixed thanks to jaybou TOPMAN

glad to have helped,it burnt my head out long enough before i sussed it out

[macca125]

Bootloop 97 fixed thanks to jaybou TOPMAN