BackUp of Dreambox Image with all of its Plug Ins and Cam EMUs

[NewBirth2010]

Is it possible? With all of its plug-ins and add ons?

[MetalKettle]

Is it possible? With all of its plug-ins and add ons?

Yes... you can do it via dreamup, or via a telnet script.

[NewBirth2010]

Thanks MetalKettle

But, I think DreamUp is for flashing an image. I need to back it up !

Thanks

Michael

[MetalKettle]

Thanks MetalKettle

But, I think DreamUp is for flashing an image. I need to back it up !

Thanks

Michael

DreamUp also has a backup button !

[.: JaCkPoT :.]

After you connect you will see a backup button on she right panel half way up on dreamup.

[NewBirth2010]

Thanks guys. I have tried with Telnet, but had many problems.

When I type in telnet:
cd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot


I get the error:

-sh: eraseall: not found




I will probably give up and use the DreamUp method instead !


Thanks
Michael J

[wk210003]

revice the syntax again

[opsmonkey]

Newbirth you just need to do the following..

Go to the RUN command in windows..

type telnet 192.168.x.x (replace the x with the rest of your ip address)

log in with user / pass

type..

cat /dev/mtd/3 > /tmp/backup.img

then use your FTP prog to copy the backup.img to your pc hard drive..

the code you were using.

cd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot

is to flash an image not the code to back up

[NewBirth2010]

No Guys. I did everything using the code

cd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot

In telnet I get:
-sh: eraseall: not found


My dreambox is the DB 800 HD. I think this is not working for DM 800 because it does not use .img images

Any ideas?

[westkill]

No Guys. I did everything using the code

In telnet I get:
-sh: eraseall: not found


My dreambox is the DB 800 HD. I think this is not working for DM 800 because it does not use .img images

Any ideas?

what you trying to do is for enigma1 images, dm800 is enigma2
these telnet and dreamup will not backup enigma2 images
if using barryallen theres an option to backup image of everything in image
or save your settings via software manager to hdd or usb
then every time you reflash it will pick up your settings channels/bouquets/timers/ip setting/not the cams or plugins

[pknudam]

dual unlooper

how to flash dual unlooper

[Curious123]

I do not have a dm800 my box is dm600 but this plugin work fine for me. Try this plugin on your box and see what happens;

[NewBirth2010]

I tried it Curious123.

It does not work in DB800.

Thanks Anyway.

I lost my null modem serial cable, But I think it is possible to back the DB 800 HD up, using DreamUp.

Thanks.

M.

[jicube]

if i make a back up using dream up cuold i flash this to another box and receive all channells etc and not have to set up the box

[mfaraj57]

Hi
Dream up will not back up dm800 image
the only way by using barry allen either from dream or through dcc
You may succeed in taking backup by dream up or by internet explorer in setup mode but no garrante you can restore successfully