Oscam + CCcam 2.1.3

[Rodbouy]

@ davvy you might be right.

1st step for every one should be is get the card to clear.

The test you local setups bit at a time.

Both ways will work its just what people find easier.

Time and patience and it will work.

Just put a pillow on a piece of wall so when you bang your head off it, it wont be as sore

[seanmckeown]

[account]
user = share1
pwd = bedroom1


there is other features you can add to this etc au and other stuff.

cheers for your patience, just trying to get my head around this.

so i can run oscam as cardserver with no need to run cccam.

for sharing internally i have this text in oscam.user:
user = share1
pwd = bedroom1

now to the clients box, can i still run cccam as client or do i need to use oscam as client?

[Rodbouy]

cheers for your patience, just trying to get my head around this.

so i can run oscam as cardserver with no need to run cccam.

for sharing internally i have this text in oscam.user:
user = share1
pwd = bedroom1

now to the clients box, can i still run cccam as client or do i need to use oscam as client?

The brick was ref was when trying to get it working just incase anyone thought it was some thing else and complaining about the questions.

I know I was going mad at start.

Yes the client box can stay as is. so the Cline in the CCcam.cfg would stay the same.

[bladez]

some one plz give me basic info

1- which image is best for oscam ( plz provide link )
2- boxkey is must to put in ocsacm cfg (user or server what else)
3- Basic guides to share cline as local in oscam

i read alot of post but no one provide basic guide,thats y i need to postt this thread for newbies bcoz im too :P

[sakiblateef]

I dont see why there is a need to both.

Using Oscam on its own leaves your card open to reshare despite setting restrictions like hops etc.
Using cccam with Oscam is a lot safer.

[satsmo]

Take a look at anticasc, although buggy it has some potential to prove useful if ironed out.

Oscam will interrogate each user for ecm requests for 10 minutes and pick out the naughty ones. Then you can decide what to do or let Oscam do the work for you.

[Rodbouy]

Using Oscam on its own leaves your card open to reshare despite setting restrictions like hops etc.
Using cccam with Oscam is a lot safer.

Suppose it depends on if you trust the person you share with and if you dont, Dont.


I have been using anticasc and so far nothing has flagged.

You can enable it in oscam.conf

see here

http://oscam.ump2002.net/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt

[sakiblateef]

Oscam is a proxy, it will reshare regardless of what restrictions you set including anti cascading.

If you have clients you trust then its fine to use Oscam otherwise I would use Oscam with CCcam to gain some control of the share.

[Rodbouy]

Only thing is that I been told, even if you have more control over the share by using OScam+CCcam if the clinet uses OScam he can still reshare.

[Replay 2]

Great thread..I read (almost) all of it ,
but I still can't clear my card.

I need to view my 093b card on dream elite image DM8000. no sharing. so I understand I can use Oscam alone.

Which svn is stable?
Which config files I should use?
and I don't have a box ID, but I understand I don't need it with Oscam...right?

Thanks for all the help..

[southpaw]

If oscam can't restrict reshare rights then its a fundamental flaw . Having no control over shares is like issueing a blank cheque

[Rodbouy]

If oscam can't restrict reshare rights then its a fundamental flaw . Having no control over shares is like issueing a blank cheque

Its depending on trust, and possibly a kink in payservers chain.

[Rodbouy]

Just thought I would add this that would better explain anticasc.

it was posted my a Ianmassy from a other forum.

so use anticascading then,set to only give 3 ecm's in the time before your card starts to breakup.
with NDS this is about 450ms and a new ecm is required every 7 0r 8 seconds.

so i have my anticascading set to allow 3 different ecm requests from any given peer within an 8 seconds. I allow 3 because that gives peers a chance to channel hop.

if a peer exceeds this,he is punished by having the correct cw sent to him,but it is delayed by 450ms.

so it cannot be reshared.

This punishment is implemented for a period of 5 mins.

After which oscam then restores normal access again and monitors the usage for a period of 1 min.

if it exceeds again it is punished again.

the outcome of this is your card cannot be reshared by your peers unless you allow it to be.

[DreamBoy69]

some one plz give me basic info

1- which image is best for oscam ( plz provide link )
2- boxkey is must to put in ocsacm cfg (user or server what else)
3- Basic guides to share cline as local in oscam

i read alot of post but no one provide basic guide,thats y i need to postt this thread for newbies bcoz im too :P

I got this from another place. I am a noob but maybe someone can make what to do.

When you do please tell me in easy terms



Here are working configs for s*y uk using Oscam + CCcam 2.1.3.
Set 256 behind N line for cccam versions till 2.1.3 to get card as local!
oscam files can be found in folder;
/var/tuxbox/config (Enigma1)
/etc/tuxbox/config (Enigma2)
Edit the file Oscam.server file, add your boxkey and remove the #
This configuration blocks the killer EMM, if you want to get entitlements remove the blockemm from oscam.server

Oscam.conf

Code:
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 192.168.1.100

# protocols

[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:000000

Oscam.server

Code:
[reader]
label = slot1
protocol = internal
device = /dev/sci0
#boxid = yourboxid
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963

Oscam.user


Code:
[account]
user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1,2
au = 1
caid = 0963

[mtv1]

Its depending on trust, and possibly a kink in payservers chain.

i thought thats why you use ccam alongside oscam , if oscam didn't have this flaw you would only use oscam standalone ?? yes ??