Technomate Softcam Updates

[alunfennell]

For Technomates Series 1000, 3000, 5200. 5300, 5400, 5600, 6800, 6900

Dream TV 00-01 Keys (146?E)
NumeriCable (84) next 0C Keys (13?E)
Pro TV (86) next 0C Keys (13?E)
All Keys Updated...

[chrisreduk]

I have a tm 6800 and do not appear to have this option on the reciever if i have understood your replie correctly

I have a TM6800 and the way to get to the bit you are looking for is from the menu button go to system setting then open CAS menu

[tanvirbutt]

thank u very much

[viridens]

I spent a bloody cold afternoon installing a Technomate motor on my old 0.8m dish to use with a Technomate 5200D. Pleased with the results, and very glad to get more channels with these keys. Thanks!!

[RICHARD SNELLER 53]

THANKS TO U FOR INFO

[redsanta]

Hi i am new to this. I have Technomate 6800HD Super, would be greatfull if you could help me with what i need to download to watch Russian channels. Thanks

[.: JaCkPoT :.]

You would need a large dish to receive many of the russian channels as they appear more often near the 30east to the end of the visible eastern horizon..

[alunfennell]

For Technomates Series 1000, 3000, 5200, 5300, 5400, 5600, 6800, 6900 and Super

Dream TV 00-01 Keys (146?E)
Canal + NL (6A) next 0C Keys (19?E)
All Keys Updated...

[chrisreduk]

For Technomates Series 1000, 3000, 5200, 5300, 5400, 5600, 6800, 6900 and Super

Dream TV 00-01 Keys (146?E)
Canal + NL (6A) next 0C Keys (19?E)
All Keys Updated...

I have a TechnoMate 6800HD.......I am having terrible trouble getting Nagravision to work....I have tried everything. The only time I was successful was when I was able to input the keys manually through my diablo cam. There is a "current channel keys edit" Unfortunately, despite formatting the cam, reinstalling the .dup file and then the key/bins that option will not open anymore.

What I think I need are key/ bins with the conax and nagra on them, but all I can find are descriptions like the above.

Can anyone point me to where a can download the correct key/bins, or better still, if there is an updated .dup file of Underworld 1,51 or any other updated file of that type.

Thanks

Chris

PS Before you tell me I can manually input the Nagra keys onto the Cas menu of my TM.....I already did that and they don't work.

[benny/9]

I have a TechnoMate 6800HD.......I am having terrible trouble getting Nagravision to work....I have tried everything. The only time I was successful was when I was able to input the keys manually through my diablo cam. There is a "current channel keys edit" Unfortunately, despite formatting the cam, reinstalling the .dup file and then the key/bins that option will not open anymore.

What I think I need are key/ bins with the conax and nagra on them, but all I can find are descriptions like the above.

Can anyone point me to where a can download the correct key/bins, or better still, if there is an updated .dup file of Underworld 1,51 or any other updated file of that type.

Thanks

Chris

PS Before you tell me I can manually input the Nagra keys onto the Cas menu of my TM.....I already did that and they don't work.

************************************************** ***
what channels in nagra encryption wont open and what
satellite are the channels on, if it's digi-tv on thor 1w
the latest tm softcam will open these channels

[.: JaCkPoT :.]

addition to benny/9`s post... turn the au off too.....

[chrisreduk]

************************************************** ***
what channels in nagra encryption wont open and what
satellite are the channels on, if it's digi-tv on thor 1w
the latest tm softcam will open these channels

Yes Benny, it's Thor 1W...... I have already tried putting the latest TM softcam onto my flash drive and plugging my Flash Drive into my technomate.....I then went to USB on my TM menu....chose USB and then data transfer.....But it still doesn't work.

Languages _ English
Caids File _ Caids
Auto PMT _ ON
Emulators _ ON
N2 AU _ OFF
Emulators Priority _ 1 Emu 2 _ Cards
Fixed CW _ OFF
Smart Card Message _ Show Never
Administrator _Menu

[benny/9]

Yes Benny, it's Thor 1W...... I have already tried putting the latest TM softcam onto my flash drive and plugging my Flash Drive into my technomate.....I then went to USB on my TM menu....chose USB and then data transfer.....But it still doesn't work.

Languages _ English
Caids File _ Caids
Auto PMT _ ON
Emulators _ ON
N2 AU _ OFF
Emulators Priority _ 1 Emu 2 _ Cards
Fixed CW _ OFF
Smart Card Message _ Show Never
Administrator _Menu

***********************************
this is very stange mate,i have the tm 6900 receiver and it opens digi-tv have you got the patch turned off ? take a look in the menu on your receiver on the remote press menu> go to system information> press>ok
can you see two bars cas menu and biss menu ? on this panel if not type 2004 on your remote and these menu bars will appear exit the menu now the patch is on and the chns should open now if this is set correct i will post the softcam i use to see if this helps

[chrisreduk]

***********************************
this is very stange mate,i have the tm 6900 receiver and it opens digi-tv have you got the patch turned off ? take a look in the menu on your receiver on the remote press menu> go to system information> press>ok
can you see two bars cas menu and biss menu ? on this panel if not type 2004 on your remote and these menu bars will appear exit the menu now the patch is on and the chns should open now if this is set correct i will post the softcam i use to see if this helps

Yes, I can see CAS and BISS. I think I explained that before when I said I input the keys manually from here on the Nagravision option digiTV 2011.....They didn't work then and they don't work now.
Please can you point me to the softcam you use?

[masikoglu]

tesekurler