Noobs guide to patching your Technomate

[.: JaCkPoT :.]

Guide for the newbies.

Heres how to load the patches.

• Download the relevant patch and extract.
• Download the relevant loader and extract.
• Connect your receiver to the pc via rs232c cable.
• Choose the correct com port.
• Leave the receiver on standby.
• Open the loader and select the software tab.
• Press browse and find the extracted patch.
• Press ok then start then wait.

This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.

USB, By Benny/9

FIRST ALWAYS MAKE SURE YOU USE THE CORRECT PATCH FOR YOUR MODEL
there are various models and only the correct patch will work or even load on your model
************************

• Download the correct patch for your receiver.
• Open the zipped folder and take the patch out ready to transfer the patch onto your usb memory stick.
• Insert your usb memory stick in the usb port under the front flap.
• Turn the receiver on ready to load the patch then press the usb button on your remote.
• on the next screen go to data transfer and click>OK.

now you will see a panel with the patch on it, it will highlight, [for patching].
press ok on the highlighted patch then it will load and when it gets to 100% and has loaded, and the receiver has re-booted [turned off and on again] and the channel opens, remove your usb memory stick. you have now loaded the patch and your channels will now open.
***************************
you also load softcams/channel lists/official software etc:in exactly the same way by selecting
the item you want to load.
****************************


Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.

Hope this is found helpful. Sadiq999uk and Benny/9

[tee23uk]

Guide for the newbies.

Heres how to load the patches.

• Download the relevent patch and extract.
• Download the relevent loader and extract.
• Connect your receiver to the pc via rs232c cable.
• Choose the correct com port.
• Leave the receiver on standby.
• Open the loader and select the software tab.
• Press browse and find the extracted patch.
• Press ok then start then wait.

This will take a few minutes. Thats it. The same things need doing for softcams but make sure you use the keys tab. Everything else is the same.

Note: if scrambled channel appears on channels which should open; wait a few minutes. This will enable the auto update to kick in.

Hope this is found helpful. Sadiq999uk

hi i have the technomate 6900 but all still scrambled im using s/w version 6.53p june 27th on cass menu can you advise me if ive got something wrong thank you

[titian40]

Thanks for help. The AU delay has fooled me before!

[.: JaCkPoT :.]

Thanks for help. The AU delay has fooled me before!

i take it your sorted now.

[dundeejim]

can i use a usb flash pen instead m8?

[.: JaCkPoT :.]

If you got usb receiver then ofcourse.

[dundeejim]

the patch wont go on the pen

[.: JaCkPoT :.]

You have to extract the file first, the box cant unzip or extract. Try that.

[dabba]

what is the difference between patching and softcam ?

there appears to be new for both almost daily, do they need patching daily ?

thanks

[.: JaCkPoT :.]

A patch is firmware/software to help your receiver work which has keys already in it but when they expire they need to be updated to thats what the softcam does.

[dundeejim]

yes when i try to extract say something about cant do it

[dabba]

what is the difference between patching and softcam ?

there appears to be new for both almost daily, do they need patching daily ?

thanks

and do the soft cams AU?

how often on average do they req updaing ?

[.: JaCkPoT :.]

Keys au very regularly on some channels and on others after a period of time.

[dadadere57]

I ve just joined this website. I have no experience of satelitte receiver . How can I download technomate loader for my 6900 Combo?

Dadadere57

[dundeejim]

go to the technomate download select ur box and download patch