VVDI PROG

[solitaire]

v4.5.5 (2017-02-27)
* This version DON't need update
firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.5
version in Doc folder
+ Support operate software while
opening the diagram
* Fix HC908AB32_FLASH,
HC908AS32A_FLASH,
HC908AS60A_FLASH,
HC908AZ32A_FLASH,
HC908AZ60A_FLASH,
HC908AZ60E_FLASH,
MC68HC908LJ24,
MC68HC908LK24 options
write FLASH error problem
in <2-MCU>->
<MOTOROLA-MC69HC(9)08>
+ Add M35080-OLD-VERSION option
in <1-EEPROM&FLASH>-><ST>
+ Add MC9S08SU8_UNSECURED,
MC9S08SU16_UNSECURED options
in <2-MCU>-><MOTOROLA-MC9S08>
+ Add MED17.5.20(TC1766) option
in <3-ECU>-><VOLKSWAGEN>
+ Add GRAND-CHEROKEE-IMMO(0L72A)
option
in <4-IMMOBILIZER>-><JEEP>
+ Add CS35(2016) option
in <5-DASHBORAD>-><CHANGAN>
+ Add TRUMPCHI-GA6(2015) option
in <5-DASHBORAD>-><GACMOTOR>
+ Add KG-MODULE-W221-OLD,
KG-MODULE-W221-NEW options
in <8-OTHER>-><BENZ>
+ Add F-SERIES-SZL-MODULE option
in <8-OTHER>-><BMW>
+ Add TRUCK-LOCK-MODULE(2014--)
option in <8-OTHER>-><JEEP>

https://mega.nz/#!Ghx0mQYB!DtZ6pbc7k...mwkFuJXC_wJkX0

[eagleone-two]

You can read and write without problem by Vvdi prog. I did it in last week.


Wysłane z iPhone za pomocą Tapatalk

[testit34]

Hi
I thought this version of VVDI prog was supposed to have script to 0 KM various CAS modules in BMW? Do you know what version it will be added.
Thanks

[habbyb]

You can read and write without problem by Vvdi prog. I did it in last week.


Wysłane z iPhone za pomocą Tapatalk

Hello mate, thank you for the answer please say together with flash.Thanks

[eagleone-two]

Only eeprom. Tell me what mask you have, original and new ezs.


Wysłane z iPad za pomocą Tapatalk

[BMWS1KRR]

I need to connect this to a BMW EWS4 with the 9S12G128

I see the connection points on the EWS4 on the PcB side and not the chip side

does anyone know the TMPro2 wire connections are called?
I see on TMpro2 it is orange, blue , red , white .. if someone knows what these are on the 9s12g128 connection I have the schematic on the pcb location pads.

Vvdi shows to connect at
VSSA /ground black wire - so what color is ground on TMPro2?
RESet yellow wire - so what color is RESET on TMPro2
BKGD purple wire- so what color is BKGD on TMPro2
VCC/VDDX3 red wire - so what color is VCC/VDDX3 on TMPro2

TIA

[juancho18]

THE UPDATES ARE SO GOOD.....
But I would like to update ...
NPX PCF7947 433mhz id 46 14PIN IT IS USED IN RENAULT
FLASH 29Fxxx O ECU RENAULT SIRIUS 3132- 3134 - 32N 32x
It's normal

[eagleone-two]

I need to connect this to a BMW EWS4 with the 9S12G128

I see the connection points on the EWS4 on the PcB side and not the chip side

does anyone know the TMPro2 wire connections are called?
I see on TMpro2 it is orange, blue , red , white .. if someone knows what these are on the 9s12g128 connection I have the schematic on the pcb location pads.

Vvdi shows to connect at
VSSA /ground black wire - so what color is ground on TMPro2?
RESet yellow wire - so what color is RESET on TMPro2
BKGD purple wire- so what color is BKGD on TMPro2
VCC/VDDX3 red wire - so what color is VCC/VDDX3 on TMPro2

TIA

This is thread about VVDI not TMPro2


Wysłane z iPhone za pomocą Tapatalk

[vasiliev7719]

Autoliv 620595100 D70F3624- OK

[aceton]

Where can i buy this prog ?
I found a few sites.
http://www.vvdi.com/vvdi-prog
http://www.vvdishop.com/wholesale/vv...x-adapter.html
http://xhorse.uk/

[philipcoin]

You can buy on any of the website...

[ibratex]

Today read Rover CEM success with Last version

Enviado do meu SM-J320FN atrav?s de Tapatalk

[Levanime]

Samic,

no plans to add
MSV70,
MSV80
MSV80.1
MSD80,
MSD81?

[juancho18]

error read mcu 9s12hz256 ford fiesta 2009
pin out correct in upa bkgd, gnd, reset, +5v

[2017-03-04 13:08:13] : Initialization chip...
[2017-03-04 13:08:13] : Try Auto Detect Frequency 00000000
[2017-03-04 13:08:14] : Try Frequency 08000000
[2017-03-04 13:08:14] : Try Frequency 16000000
[2017-03-04 13:08:15] : Try Frequency 20000000
[2017-03-04 13:08:15] : Try Frequency 10000000
[2017-03-04 13:08:16] : Try Frequency 11059200
[2017-03-04 13:08:16] : Try Frequency 12000000
[2017-03-04 13:08:17] : Try Frequency 04000000
[2017-03-04 13:08:17] : Try Frequency 40000000
[2017-03-04 13:08:18] : Try Frequency 02000000
[2017-03-04 13:08:18] : Try Frequency 02750000
[2017-03-04 13:08:19] : Try Frequency 01000000
[2017-03-04 13:08:19] : Try Frequency failed

[electromech]

Today read Rover CEM success with Last version

Enviado do meu SM-J320FN atrav?s de Tapatalk

Hi which model was the cem in?