Renault CAN/K-line ECU Tool

**jodge** · 6th October, 2019, 01:20 PM

Originally Posted by Jimmy07

What is Best Buy for programming keys Can ECU tool or Renolink ?

ecu too have much better virginise options.. HFM, ecu, immo...etc, Simply qick GUI.. Key lerning is extremely fail proof, far better hw. I have both and ecu tool is always my first choice.

**fabianlm** · 6th October, 2019, 02:51 PM

I programmed chinese cards with PCF 7941 and PCF 7952 on some Megane 3. I will try Clio4 with PCF7953.

**admiralx** · 7th October, 2019, 06:37 PM

news for update ???????
2.88 from 5-6/2019

**TERMINATOR1000** · 7th October, 2019, 09:24 PM

Originally Posted by admiralx

news for update ???????
2.88 from 5-6/2019

it's free since beginning of tool , relax , for £600
Rest of update available for this tool Twingo 3 Trafic 3 coming soon ..... & the END ( no tag key tool no can doing Megane 4 system )

**gogu** · 7th October, 2019, 10:37 PM

Hello.and for duster Ph3?

Sent from my SM-N950F using Tapatalk

**darrenleonard** · 8th October, 2019, 09:59 PM

can renolink write a remap dpf off file? i have file ready i just need to write. i used clone kess to read but not able to write through protocol sid 305 but read ok. or would anyone know what i can buy to write this file please, preferably the cheapest option

**RIMKACHIP** · 9th October, 2019, 06:44 PM

Here is Renault ecu tool not renolink but I think renolink can not write flash on sid305 ( I think). Renault ecu tool not possible.

Envoyé de mon iPhone en utilisant Tapatalk

**tek2dk** · 9th October, 2019, 07:17 PM

Read & Write a lot of SID 305 with kess!

**tankist83** · 11th October, 2019, 01:23 PM

Hello! who knows why a sim card is installed on the board?

**TERMINATOR1000** · 11th October, 2019, 01:41 PM

Originally Posted by tankist83

Hello! who knows why a sim card is installed on the board?

I/O terminal HW , activated by SIM card !

**sdnatlst** · 18th October, 2019, 06:44 PM

Today had espace IV 2005

all keys lost,, they order card from dealer.

Renault ECU tool connect OK - SECURITY login error , cannot go any further.

Also tried lonsdor, Autel,, all gave pin password pull error or security access validation failed.

So obviously problem car side,,, but any ideas ?? Car battery was dead, and had brand new battery fitted same morning. Just wondering what could cause it.
Only DTC error code found was Start button fault, but igniton was OFF which is what ECU tool said was required.

**godfathertre** · 18th October, 2019, 07:01 PM

being a Renault wiring fuses earth the list is endless is the car being sitting for a while also check card reader very common on these

vehicles can just try a second hand one.

**sdnatlst** · 18th October, 2019, 07:23 PM

All tools said no card should be inserted, and ignition should be OFF

so i cant see a card reader fault being anything to do with not pulling the pin code, or security access problem?

it was the PRE 2005 model according to ECU tool, (white light near reader) which was correct when i checked the light.

but yes, car had been sitting for a while, just thought strange all tools connect fine, just cannot get the security/pin

**sjc1** · 18th October, 2019, 09:22 PM

clear all codes in ecu and uch battery at 13v and leave side lights on as akl

**rokibar** · 24th October, 2019, 06:50 AM

yesterday tried add new card clio 4 from 2014. old card repreogrammed normal, new recognised as unknown blank card and of course not accepted by car. some device recognise booth original and new(original also) cards 4A. tango recognise booth cards as manchester regular card unknown. tried renewed card with A2C53419439 stamp at board and same. are there trick, my cards are wrong or renault can tool can't do it?