X-Prog M

[gyalog_kakkuk]

Configured in the options of USB ports? Do not put a serial port.

[Recoder]

Hello.
I am a beginner, so I need some help.
Just bought X-prog m - it came only with adapters and usb cable.
I try to read M95080 Eeprrom in the dip socket, but after I click read it only writes initialising device and it does nothing else.
It is broken, or I did something stupid?

Check that you are connected to USB port .
Go onto top Pulldown menu and goto Enviroment and see what settings are in the menu ie Should be USB etc .
HTH

[16eddi67]

No, xprog donot make checksum in writing. Do you can send me picture how connect Xprog to EDC16, or SID 803.... or write how this connect, BDM100 use different pins (only 10 pins) then Xprog (12pins) in BDM pads in ecu. But checksum is automatic in BDM100 for flash only, for MPC and E2P is not in writing too.

Connect Xprog M to EDC16 BDM

[Code Breaker]

Hello.
I am a beginner, so I need some help.
Just bought X-prog m - it came only with adapters and usb cable.
I try to read M95080 Eeprrom in the dip socket, but after I click read it only writes initialising device and it does nothing else.
It is broken, or I did something stupid?

How do you physically connect the 95080 to the x-prog-m? which dip socket did it come with for the 95080?

[gyalog_kakkuk]

Hi all

I need atmega dump Xprog-M.
Please help....
My Xprog only write device is client

Thanks

[avengervln]

Hi all

I need atmega dump Xprog-M.
Please help....
My Xprog only write device is client

Thanks

Check correct device port in environment options.
Press the update button, if window with authorisations shown, then firmware is ok. I think..

Check connection to chip. by the way, what chip you are trying to program?

[card2diag]

Hi, i bought x prom from China, it works well, i give that guy email to you, ( link removed)

Maybe he can help you

hey,your guy mean xprog 5.0?

[adikk]

Connect Xprog M to EDC16 BDM

Hi! May be You know how connect Xprog-M to Delphi ECU by BDM?

[obdmaster]

heres picture of my clone xprog-m with BDM interface virginising 307 BSI, big thanks to umoussa, for helping me with virgin dump. thanks m8.


clone xprog-m read verified, program, verified first time. these are a very good tool.

[baikas2004]

i boot fron chaina x prog m works ok no problems

[canorivera]

heres picture of my clone xprog-m with BDM interface virginising 307 BSI, big thanks to umoussa, for helping me with virgin dump. thanks m8.


clone xprog-m read verified, program, verified first time. these are a very good tool.

Hi my friend I just received my Clone XProg-m yestarday and I already activated it with software v5.0, but I don't know how to use it i want to learn how to use, is there any possibility that you can send me an exercise to do, I mean in case you have one, or some information about it, I have manual but I need a practical guide .....

Thanks in advance...

[baikas2004]

CHAINA XPROG M WORKING 100%

[PremierD]

One and only Friendly warning !!!!!!!!!!!
Anne1986

[clive_pather]

the chinese only know how to sell the goods, when asked how it works they say must speak to engineer(who knows nothing) they r very good at copying but thats about it.

[canorivera]

the chinese only know how to sell the goods, when asked how it works they say must speak to engineer(who knows nothing) they r very good at copying but thats about it.

Yes we shouldn't never expect any support from chinese sellers, once we pay it's a totally different attention.