How to JTAG a DM500

[jrbaz2004a]

Hi @ll

i want flash original box , .
Have some problems with picture .
Have anyone tried flash original dm500 with jtag?
It's the same procedure ,like cloned 500s?
Before few weeks I repair 2 clone's with my jtag .
Now can't connect to original DM500s.
Can any1 tell me for sure ,if is possible to repair boot loader in origin exactly like in cloned Dream?

THX in advance
& Best Regards
JRBAZ2004A

[ashraf_f]

i was trying this but the program stop on 0% and doesn`t do anything more

<--ashraf_f added 2 Minutes and 14 Seconds later...-->

is there a new version of jtag?

[jrbaz2004a]

Hi ashraf_f
this was answer for my post? or just answer to one of post earlier post?
Thx & Regards

[ashraf_f]

no i really have a problem that the pointer stop at 0% and nothing happens
what should i do?

[jrbaz2004a]

no i really have a problem that the pointer stop at 0% and nothing happens
what should i do?

Hi again

Maybe
1) try other blimg file./sometimes may be corrupt or fail version of blimg /
2) try cut little jtag cables /I have +- 8 cm on my jtag with +- 10 cm i has problem with connection with clone's /
3) change resistors /one one/
4) make bridge between 11 - 13 connectors in your jtag
with clones my jtag work
with original box this jtag can't connect

Regards
JRBAZ2004A

[ashraf_f]

thank you so much

it was because of the length of the cable

[jrbaz2004a]

N/P my Friend .
I hope you will have no more problems with restore your boot loader .
& belive you have already flashed your box.& @ll working fine.

Best Regards
JRBAZ2004A

[ashraf_f]

every thing is Ok now, and i put the img of EDG Nemsis v 4.0

[jrbaz2004a]

I'm glad about it
so take care & hope talk soon with you .

[goodirdeto]

This was quoted earlier.

please its 2 pin jumper or 3 pin jumper thanks

[boekkie]

only test only test

Do you have bootloader of the philips tuner

[erle]

how do I see which tuner I have?

[boekkie]

blimg file,I use this for de alps tuner,wihit the jtag,DM 500S works,but i have only 22%
signaal!

<--boekkie added 2 Minutes and 36 Seconds later...-->

Can you tel my,the philips bin. file,to convert to blimg file?

Thanks boekkie

[boekkie]

Can you tel my,the philips bin. file,to convert to blimg file?

Please help my??

[madpenguin]

Hi Guys. it's nice article ,

I already flashed, and it's show result successful 100% so after that I try to upgrade new firmware but it's seems can't connect with dreamUp.

any suggestion ?

Cheers